- Drip Rings
- A good all-round paddle for general use.
- Handy notched blades are useful when fishing around mussel farms as you can pull yourself back by hooking over the ropes to reduce drifting
- Shaft can be unclipped to reduce length which makes it easier to fit into your vehicle
- Total length 223cm
-
Sale!
-
Out of stock
- Propelz Speed two piece Fibreglass Paddle
- Fully adjustable for length & blade angle
- Drip Rings
- Handy notch in blade
- Comes apart to fit in car
- Adjustable length - 220 - 230cm
-
Sale!A great Kayaking Seat with a higher, firmer & more supportive backrest area. The sides wrap around your body a bit more than a standard kayak seat, giving a secure feeling (but not a trapped, closed-in feeling). Handy zippered pocket on the back for your sunblock etc.
-
Out of stockOne way to get around a "Numb-Bum" is to purchase our accessory seat cushion to sit on top of your existing seat base. The key to its success is the marine rated medium density closed-cell foam. It is full of holes (our seat cushions have over 180 hand drilled and correctly sized holes). These work with the soft foam, allowing it to properly change shape and mold to your backside. This is critical to improving comfort without raising your centre of gravity too much.
-
Sale!Viking Round Hatch Lid This is the part you will want if you (or the kids) have lost your Hatch Lid.
-
Sale!Insulated Fish Bag - Profish Kayaks
- Fully insulated Fish Bag keeps your catch cool and in great eating condition, add ice (salt flake ice is best).
- Fits the rear well of your Profish 400 Profish 400, Reload, GT & Replay.
- Made from durable PVC with sturdy zips.
-
Out of stockSimply wrap the spectra loop around the centre of your paddle shaft then thread clip through to secure. Use the stainless clip to attach the leash to your kayak *clipping to one of the seat saddles or to the safety grab line, are good options Keeps your paddle with your kayak!
-
Out of stockStainless Steel Rod Leash. Longer than the paddle leash designed to attach your rod securely to your kayak. The extra length makes casting lures and baits easy. Spectra Cord end loops around the rod and the s/s clip attaches to the grab-line or saddle on your kayak.
-
Sale!Ready to explore more with your inflatable boat, SUP, or cooler? QuikPort by RAILBLAZA has got you covered. The powerful 3M VHB self-adhesive pad ensures an easy and fast setup for light-duty applications without drilling a single hole. Transform the way you accessorise for camping and boating trips and take your adventures to a whole new level.
- Easy installation
- Includes 3M VHB self-adhesive pad
- Can be mounted anywhere
- No need to drill holes
-
Sale!Protect your valuable sup from harm and scratches. The rail saver does just that. This product is an extension that will never scratch your epoxy board by simply adding length to the leg rope 80cm-142cm. This moves those metal and hard plastic swivel joints away from you and the board.
-
This kit contains all the parts required to install a fish finder in to a Profish 400 kayak. Including the transducer fit kit, the battery straps plus the waterproof fuse holder and terminals. You will need to use 'MS All Clear by Holdfast' sealant to waterproof the transducer scupper and cable entry points. To see how this is fitted follow the instructions in our "How To" guide.
-
Sale!Shorter than rod holders designed for boats so they keep your reel higher and drier. It also means they fit better in shallow draft kayaks. The flange dimensions are 59mm wide x 100mm long These come ready to install with a self sealing adhesive gasket and self-tapping screws.
-
Out of stockNow with 'Toe Tab' foot controls for superior control. The 'Angler' blade works brilliantly - there is no need for an up haul. For installation instructions go to the 'How To' section. Will fit any of the Viking Profish kayaks A rudder system will make your kayak much easier to manage in windy conditions and also when paddling in strong currents.
-
Sale!For holding your paddle to the side of the kayak, leaving your hands free for fishing. Simply attach it with the self tapping screws supplied.
-
Sale!The Tackle Pod™ system offers a worldwide first: a fully integrated and removable sounder, battery, and transducer setup combined with a large tackle storage space. It’s now quick and easy to remove or reload your valuable sounder, transducer, and tackle - the ultimate in convenience. With the Tackle Pod™ removed for transporting the Profish Reload & Profish GT is much lighter and easier to load onto your roof rack. Capacity 29.0 litres. PLU 222
-
This kit contains all the parts required to install a fish finder in to a Profish Reload Tackle Pod. Including the transducer fit kit, battery straps plus the waterproof fuse holder and terminals. You will need to use 'MS All 202 Sealant by Holdfast' to waterproof the transducer scupper and cable entry points. Installation instructions are under the 'How to' tab on this website.
-
Sale!The Yakima SweetRoll Kayak Carrier & Easy Loader features 2 front and rear saddles with integrated rollers. Mounts to any roof rack crossbar styles, including factory racks and any aftermarket brands. Features a spring-loaded base on each of the four saddles, which adjusts to the boat as you load it, as well as during transport.
- Complete system that includes rear saddles with integrated rollers for easy loading
- Tool-free installation
- Spring-loaded base automatically adjusts to boat when loading
- Tilting paddle technology to accommodate an array of boats and roof rack systems
- Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
- Supports one boat up to 80 lbs
-
Sale!This Ocean&Earth coiled paddle cord is designed to keep your paddle tethered to your surf ski, kayak or canoe. The Surf Ski Paddle Coil Cord is suitable for all paddle sports. 7mm coiled urethane. Moulded ends. Attach your paddle to your kayak & you'll never have to decide which one to swim after.
-
The Depth Finder & Transducer Mount Kit has been developed for kayak anglers needing an easy way to install and remove fish finders or depth finders. With this kit you can install and uninstall your fish finder or depth finder in a matter of seconds, no messy adhesives or excessive drilling of fittings required. With our extensive selection of mounts this kit can be adapted to fit any kayak or canoe.
- Enables a 100% true unobstructed reading
- Easy installation and removal allowing you to protect your sounder when transporting it.
- Add an extension for deeper water
- Choose a RAILBLAZA base to suit your needs.
-
Sale!Drop anchor and explore like never before! With CleatPort from RAILBLAZA, you have the functionality of a traditional anchor cleat plus the ability to mount any accessory. Perfect for kayaks and small craft, this easy-to-install product will keep your equipment safe no matter what waters you choose to discover.
- CleatPort gives you a tie off point for small craft
- Perfect for when you are using a kayak as s tender
- Integrated StarPort allows you to add any RAILBLAZA accessory
- Additional backing plate to keep stainless fastenings isolated from aluminium decks
- Available in black or white