-
Sale!KAYAK KIT is a complete care pack for rigid or inflatable kayaks. Step 1 is a super fast acting cleaner and Step 2 is a shine enhancing, anti-static coating to reduce resistance in the water, you'll actually feel the difference! STEP 2: Is a mix of thinned wax's and shine enhancers that quickly bond to the surface and help to fill scratch marks or imperfections giving less resistance in the water.
-
Sale!The best time to paddle is when the sun is out and the water is clear. The Eclipse Glove not only gives you protection against the sun, but it also helps to prevent blisters on those long paddles. Good hand protection will make your day more enjoyable. Available in sizes S-XL.
- UPF50+ for extreme protection against the sun
- Contoured double-layered palm in high wear areas
- Soft supple material helps improve grip with your paddle
- 2mm neoprene adjustable cuff helps maintain flexibility in the wrist
-
Out of stockFits any Viking kayak and most of the sit on top kayak
Features :
- These stoppers can be used to plug the scupper holes in your kayak and help you stay dry while you are paddling.
- High quality rubber material, strong and durable, and it will serve you for years.
- Easy to install and use, just put it on the kayaks drainage holes to prevent water coming up through and to also drain water out from the cockpit.
- TWO SIZES:
- SMALL : 40 mm at widest, tapering to 30 mm
- LARGE : 55 mm wide on the bottom
-
Sale!Keep your keys safe and dry with the Waterproof Key Pouch from Ocean and Earth. This waterproof bag is ideal for all types of water-sports and adventures. This case has heat-welded PVC construction and will keep your goods dry and afloat.
Features:
- NEW lever locking mechanism
- Ideal for all types of water sports
- Keep valuables with you safe & dry
- Heat-welded PVC construction
- Fits in your boardshort pockets
- Perfect for Indo reefs and boat rides
- Adjustable Lanyard
- Overall size 115mm x 110mm
- Pocket size 90mm x 110mm
-
Sale!Need to transport you SUP board down to the beach or lake? Too easy with the Ocean and Earth SUP Carry Strap. Featuring an adjustable padded strap which goes over you shoulder, this SUP Carry strap will make light work out of that long walk to the waters edge. Suitable for all sized SUP boards.
- Adjustable webbing
- Padded shoulder strap
- Paddle holder
- Comes in mesh bag
- Remove when in water
-
Sale!
Product description
-
Sale!
- Suitable for Kayak, Canoe, Sup and Dragon Boat Paddles
- Suitable for all kinds of racket
- Suitable for transformers, coils, motors, automotive wiring harnesses, aluminum alloy pipes, sewer pipes
- NOT suitable for SUP paddles as it will be slippery when wet
-
Out of stockThe Bixpy K-1 Angler Pro Outboard Kit™ is Bixpy’s pro version of the new K-1 Outboard Kit. The Angler Pro Outboard Kit is supplied with a 768wh battery, rather than the 378wh battery. This allows anglers to stay out longer and explore more distant waters and troll for hours. The K-1 Motor is roughly 20% shorter in length than its predecessor, the J-2 Motor, yet offers the same massive output the J-2 motors provided in a quieter, more sleek, and more rugged aluminum housing.
- Runs the Bixpy K-1 Motor for 2 + hours at top speed and up to 24 hours at slower speeds – continuous!
- Warp speed feature allows you to reach max speed with a double click
- Built-in standard rail system
- Quick release motor can be removed with just one bolt Operates via bluetooth remote control with 13 forward speeds and 3 reverse speeds
- Powered by a rechargeable 25.6 V lithium-ion phosphate battery core (768 Wh)
- Waterproof and dirt-proof with corrosion-resistant components and aluminum body
- Remote control floats in case of accidental slippage
- Safety: High quality magnetic kill leash
- Water use: Rugged anodized aluminum body for salt water or fresh water use
-
Sale!Special Introductory Pricing, Limited Stocks The Bixpy K-1 Motor is a compact, lightweight, high-performance marine motor designed and optimized specifically for personal water propulsion and small watercraft such as kayaks, dinghies canoes, paddle boards, etc... While most marine motors try to achieve more power using larger batteries and propellers, Bixpy has completely reinvented the trolling motor by borrowing technologies from hydro-electric dam turbines, jet engines and airfoil technics used in aerospace applications.
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water Use: Anodized aluminum body for salt water or fresh water use
- Cable attachment - permanently attached directly to the motor
- Quick release motor can be removed with just one bolt
- Warp Speed (Reach max speed with a double click)
- Airfoil fin for better tracking
- Water cooled for better efficiency
- Works with more than 20 different Bixpy K-1 Mounting Adapters
-
Sale!The Bixpy J-2 Outboard Kit is Bixpy's second major iteration to its, now famous, jet propulsion system that has motorized thousands of kayaks, paddle boards (SUPs), dinghies, float-tubes and all kinds of personal water craft over the last 4 years.
- Runs for approximately 80 minutes at top speed and up to 12 hours at slower speeds
- Ultralight setup (weighs just 9 lb including battery and motor)
- Operates via wireless remote control with 12 forward speeds and 3 reverse speeds
- Waterproof and dirt-proof with corrosion-resistant components
- Outboard Power Pack and remote control floats in case of accidental slippage
- Built in wire harness with 1.5m (5') power cable included for hassle free connection to your adapter
-
Sale!Pre-order Yours Now - Limited Stock Available By 14/03/2024
What's The Difference Between Bixpy PP-77-AP And Any Other Lithium Battery?
The major difference is that Bixpy PP-77-AP is Lithium Iron phosphate. They have far longer lifespans. Up to 10 years. They also have both 5V and 12V output with the 12V with a Max output of 20 Amps, which is great for things like inflatable pumps (10A battery will not run most pumps). Also, it’s a better fit and finish and additional connectors and more suited for the use. Fully water proof in aluminum housing. There’s a battery level indicator, cigarette lighter outlet, switched cable with a water proof switch and built in super fact USB outlet. So a Lithium Battery it is just a battery. Where as the PP-77 is a finished product with features and user interface. -
Sale!With 80 watts of output from mono-crystalline cells, this solar panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours.
- Outer Shell material: ETFE Laminate
- Connection point: barrel connector
- Charges the PP-378 in: 6 to 10 hours
- Includes two anchor attachment points
- Waterproof and dirt-proof with corrosion-resistant components
- Fresh and saltwater ready
-
The Bixpy Extension Cable allows you to place your Bixpy Outboard Battery further from your motor. If you would like to store your battery in the front area of your kayak or standup paddleboard or simply want the battery further from your motor, this is what you'll need. Like any other extension cord, you can plug multiple cords together to achieve desired length.
- Protection: Waterproof connector tip
- Safety: Connector cap for when not in use
-
The Super Lube Multi-Purpose Grease with Syncolon (PTFE) - 3 oz. tube is a patented NLGI grade 2 heavy-duty, multipurpose synthetic lubricant. Prevents rust and corrosion while reducing friction for better connector mating.
- Ideal for lubricating Bixpy o-rings and connectors
- Will not drip, run or evaporate, clean, non-toxic, non-staining
- Impervious to salt water
- Highly recommended to fill your main and charging connectors for diving and snorkeling
-
Sale!The Bixpy Quick Swap Rudder Kit fits all Viking Kayaks that have a standard rudder fitted, simply swap the standard rudder for this Bixpy rudder.
-
The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attach your Bixpy Motor directly onto the rudder.
- Mounts into any standard rudder 10mm pin hole
- Gravity deployment system
- 90° quick Slide & Stow feature
- Gravity "Lock-down" mechanism for reverse speeds
- 18in. x 4in. rudder blade
- Kick up feature for shallow water and hazards
- Removable cap for mounting Bixpy Jet Motor
- The top of the pin to the top of the motor measures 12.25 inches or 305 mm
- Pin length is 85 mm. Gap from pin to blade is 38 mm
- To work effectively, the Bixpy motor needs to be about 2" to 3" below waterline
-
Sale!The Bixpy Low-Profile Thru-Hull Pedal Drive Adapter offers a simple drive well mounting option for the Bixpy J-2 Motors into Hobie kayaks.
- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
Sale!No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.
- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.
- Sturdy and stable adapter with all parts included for easy installation
- Seals to keep the pod dry
- Weighs less than 2 lbs
- Motor shield to protect the motor in case of accidental collision with bottom
- Includes DIY ThruHull™ POD Adapter kit with all hardware (Dry pod not included)
-
The Bixpy WillFit Power-Pole Adapter allows you to easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot, providing a convenient stern-mounted motor option.
- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 9.5″ to 14.5″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
- 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
-
Sale!With the Universal Kayak Adapter, you can attach your Bixpy Motor to virtually any kayak, canoe or small watercraft. The aluminium pipes will adjust to accommodate virtually any length and configuration, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various watercraft.
-
Sale!With the Bixpy Universal Transom Adapter, you can attach your Bixpy Jet motor to virtually any small watercraft, dinghy or tender. The Bixpy is the perfect alternative to having a heavy, smelly and hard to start small petrol motor. It only weighs around 2kg with the motor attached, so anyone can lift it and easily attach it to your boat.
-
The Pipe Locking Bracket is perfect for locking any stern mounted pole adapter in place for situation where you need your motor to hold position. The steering adapter bolts onto the vertical pipe swivel sleeve and tightens using stainless steel screws. Then the locking pin inserts into the gap of your pole clamp to lock your motor in the desired direction.
-
Sale!If you own an inflatable kayak or an inflatable stand up paddle board (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables. For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you'll be able to easily slide your Bixpy Motor onto your newly installed fin box.
- Easily attached to inflatable and PVC materials using adhesive glue
- Motor draft: 6" (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
- Water use: All PVC materials made for salt water or fresh water use
-
Replacement charger for Bixpy Outboard Batteries that have a 2-pin charging port, including the PP-378 batteries supplied with J-2 Bixpy Outboard Motor Kits
-
Connector caps protect your connectors during storage and transportation. When your motor is in use, remove your connector caps to prevent them from coming loose and getting lost. The Bixpy Connector Caps are held to the connector body with a small tether, that will not withstand the force of water while the Bixpy J-2 Motor is in use. So it is best to remove them while motoring.
-
Sale!
Leak-proof Performance:
The adapter is made of high-quality plastic materials and is resistant to pressure. It is long-lasting, with strong sealing and leak-proof performance and superior air leakage performance.Lightweight and Portable:
Because the adapter is lightweight and portable, it is easy to carry and store; there is no need to carry multiple types of inflating equipment. The multi-function valve adapter can suit all of your requirements and lighten your load.Wide Application:
The adapter is suited for all types of surf paddle boards, canoes, kayaks, inflatable boats, and inflatable beds.Easy to Inflate:
The adaptor makes it simple to inflate and deflate boats. With the gasket inside, there will be no air leakage between the adapters.Fast Connection:
The adapter allows for a quick connection between the hand pump valve adaptor and other valve adapters. -
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!
- Protection: Water-proof, dirt-proof and corrosion resistant components
- Water use: All materials made for salt water or fresh water use
- Mount to any flat surface using four bolts or screws
-
Sale!Pack Racks are a soft inflatable roof rack system, engineered to transport SUP boards, boats, skis and long items of gear, yet pack down into a supplied 4 litre packsack. Perfect for traveling (rent a vehicle without having to pay a roof-rack surcharge), or for use in families or groups where not every vehicle is fitted with a roof rack, Pack Racks are simple to install and hold your gear securely.
-
Sale!Available in two sizes, the large Traveller Soft Racks are ideal for large canoes, wide beam watercraft, or SUP boards, while the regular size is best for smaller craft. They are compatible with any tie-downs.
- Three step quick fit system
- Strong removable daisy chain gives multiple tie-down points
- Heavy die-cast cam buckle
- Both sizes have a wide footprint to disperse the load on the roof
- Grippy base reduces rack movement for a more secure load
-
Sale!Available in two sizes, the large Traveller Soft Racks are ideal for large canoes, wide beam watercraft, or SUP boards, while the regular size is best for smaller craft. They are compatible with any tie-downs.
- Three step quick fit system
- Strong removable daisy chain gives multiple tie-down points
- Heavy die-cast cam buckle
- Both sizes have a wide footprint to disperse the load on the roof
- Grippy base reduces rack movement for a more secure load
-
Sale!Insulated Fish Bag - Profish Kayaks
- Fully insulated Fish Bag keeps your catch cool and in great eating condition, add ice (salt flake ice is best).
- Fits the rear well of your Profish 400 Profish 400, Reload, GT & Replay.
- Made from durable PVC with sturdy zips.
-
Sale!The fully insulated Chill Pod fits neatly into the rear of the Profish Reload, 400 & GT. The "Bread-Bin" style lid opening works perfectly for left or right handed people plus the internal capacity holds a lot more fish than it looks! The Chill Pod will keep ice and fish cold for hours, meaning your fish will stay in perfect condition even on hot days. At the end of your days fishing, simply lift the Chill Pod out of your kayak and into your vehicle - very clean and tidy! The Chill Pod also tows very well and is a popular choice for spearfishing, where keeping your fish out of the water has obvious advantages! We recommend using Salt Ice for best results as it lasts longer & is better for the condition of the fish.
-
Sale!Insulated, White PVC Soft Cover for the rear well of your Profish 400, Reload GT or Reload .
-
Out of stockNow with 'Toe Tab' foot controls for superior control. The 'Angler' blade works brilliantly - there is no need for an up haul. For installation instructions go to the 'How To' section. Will fit any of the Viking Profish kayaks A rudder system will make your kayak much easier to manage in windy conditions and also when paddling in strong currents.
-
Sale!Stainless Steel Rod Leash. Longer than the paddle leash designed to attach your rod securely to your kayak. The extra length makes casting lures and baits easy. Spectra Cord end loops around the rod and the s/s clip attaches to the grab-line or saddle on your kayak.
-
Sale!
- Drip Rings
- A good all-round paddle for general use.
- Handy notched blades are useful when fishing around mussel farms as you can pull yourself back by hooking over the ropes to reduce drifting
- Shaft can be unclipped to reduce length which makes it easier to fit into your vehicle
- Total length 223cm
-
Sale!
- Propelz Speed two piece Fibreglass Paddle
- Fully adjustable for length & blade angle
- Drip Rings
- Handy notch in blade
- Comes apart to fit in car
- Adjustable length - 220 - 230cm
-
Sale!The Adventure Voyage™ paddle is compact, durable and lightweight, making this paddle a great entry level choice for recreational kayaking and long distance touring. It can be separated into 4 parts for easy storage and convenience.
-
Sale!Stay sun-safe with the Mens Indo stiff peak Surf Hat. Lightweight in its construction and with a shallower soft peak, this hat will keep you comfortable, protected and out in the surf for longer.
- UPF 50+. Excellent Protection - Australian Radiation Protection and Nuclear Safety Agency Sun Protection Rating.
- Maintains clear vision while surfing.
- Quick release snap buckle. Adjustable for correct fit.
- Release water after duck dives and wipeouts.
- For secure fit. Attach wetsuit zipper webbing for added security.
- Comfortable and flexible. Protects your ears from sunburn.
- Protects your neck from sunburn. Essential on Indo boat trips.
- Inside top of the hat. Fits Legionnaire flap when not in use (or stash some rupiah for transport whilst in Indo).
-
Sale!Great looking and comfortable. These team Viking shirts are cool to wear and quick drying. Ideal for wearing while kayaking and fishing, SPF 50+ rated.
-
Sale!This SUP cover has all the important features to keep your beloved SUP safe including uv reflective tarpee, 5mm shock-absorbing foam, handle, a protective nose panel, a deck slit to access your SUP handle and a fin slot. You can trust that the Barry Basic will keep your SUP well protected. The bag can fit 1 board.
- EXTRA PROTECTION : Extra Tough 600D protective fabric in high impact areas. Top Side (Nose & Tail) / Bottom Side (Nose).
- UV REFLECTIVE TARPEE : Thick, heavy duty outer fabric. Water proof, UV and stain resistant designed to reflect heat and protect boards.
- THREE LAYERS OF PROTECTION : Top Layer: Thick UV reflective tarpee / 2nd Layer: Shock-absorbing foam. / 3rd (inside) Layer: Tarpee lining.
- SHOULDER STRAP : Barry Day : Nylon dog clip at nose end and strap can be stashed inside cover. Barry Double: Totally detachable.
- HEAVY DUTY ZIPPERS : Large, non-corrosive nylon zips.
- HANGING HOOK : All covers supplied with patented removable hanging hook.
- REFINED TEMPLATE SHAPE : Updated template shapes. Refined to suit current board shapes.
-
Sale!Paddle board / SUP board bags. Many sizes available.
- 10mm padding top and bottom
- Full opening zipper. Easy to put paddle board in and out of the bag
- Velcro fin slot
- Padded shoulder strap
- Tuff handle
- Pocket on the inside of bag
-
The kayak paddle drip ring is used to prevent excess water from flowing down the paddle shaft without paddle movement.
- Adopting quality rubber material, the kayak paddle drip ring is durable, solid and strong enough.
- Easy to install on the port and starboard side of paddles.
- Ideal drip rings keep excess water from running down the paddle shaft while out on paddling excursions.
- Coming with 4 pcs in a package, you can use them for long time, and it is very practical.
- Fit for most kayak canoe paddles. Inner diameter: approx. 30mm/1.18inch.
- Suitable for 1-1/8" to 1-1/4" diameter shafts.
-
Sale!For Stand up paddle board (SUP), Dinghy Boat, Surfboard, Inflatable Kayaks and boats and more...
-
This kit contains all the parts required to install a fish finder in to a Profish Reload Tackle Pod. Including the transducer fit kit, battery straps plus the waterproof fuse holder and terminals. You will need to use 'MS All 202 Sealant by Holdfast' to waterproof the transducer scupper and cable entry points. Installation instructions are under the 'How to' tab on this website.
-
Sale!The FPV-POWER 12v 2A Standard Wall Charger is the same charger that comes supplied with our battery combos. Purchase as spare or replacement for 17.5AH and 7AH Battery.
-
Sale!Ready to take your Lowrance HOOK2 4x or 5x fishing game to the next level? Look no further than the RAILBLAZA Fish Finder Mount R-Lock Hook 2 With its tilting and removable design, 3 axis mount feature, friction joints, and adjustable angle – you can be sure that your display is secure and level for an optimal experience.
- Allows Lowrance HOOK2 4x and 5x models to become StarPort compatible
- Single hand display tilting
- Features R-Lock joints
- Accepts fish finders up to 1.5kgs
- StarPort base not included
-
Sale!The Viking Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines. Waterproof silicone recommended, but not included.
-
Sale!Simply wrap the spectra loop around the centre of your paddle shaft then thread clip through to secure. Use the stainless clip to attach the leash to your kayak *clipping to one of the seat saddles or to the safety grab line, are good options Keeps your paddle with your kayak!
-
Sale!Universal door latch step makes loading and securing down your kayak/load easier by giving you that extra height advantage.
- Foldable and easy to store.
-
Sale!
Gill Pro Racer Buoyancy Aid (4916).
The Gill Pro Racer Buoyancy Aid has been developed to be lightweight, with minimum bulk, and to be as comfortable as possible. It's shaped to allow full freedom of movement during fast-paced racing conditions, and it is fully adjustable to enable a snug fit against your body.