-
Sale!Pre-order Yours Now - Limited Stock Available By 14/03/2024
-
Sale!With 80 watts of output from mono-crystalline cells, this solar panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours.
- Outer Shell material: ETFE Laminate
- Connection point: barrel connector
- Charges the PP-378 in: 6 to 10 hours
- Includes two anchor attachment points
- Waterproof and dirt-proof with corrosion-resistant components
- Fresh and saltwater ready
-
The Bixpy Extension Cable allows you to place your Bixpy Outboard Battery further from your motor. If you would like to store your battery in the front area of your kayak or standup paddleboard or simply want the battery further from your motor, this is what you'll need. Like any other extension cord, you can plug multiple cords together to achieve desired length.
- Protection: Waterproof connector tip
- Safety: Connector cap for when not in use
-
Out of stockPropeller Guard Fine Grill is the perfect accessory if you use your Bixpy in places where excess seaweed, small pebbles and other debris are present
-
The Super Lube Multi-Purpose Grease with Syncolon (PTFE) - 3 oz. tube is a patented NLGI grade 2 heavy-duty, multipurpose synthetic lubricant. Prevents rust and corrosion while reducing friction for better connector mating.
- Ideal for lubricating Bixpy o-rings and connectors
- Will not drip, run or evaporate, clean, non-toxic, non-staining
- Impervious to salt water
- Highly recommended to fill your main and charging connectors for diving and snorkeling
-
The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attach your Bixpy Motor directly onto the rudder.
- Mounts into any standard rudder 10mm pin hole
- Gravity deployment system
- 90° quick Slide & Stow feature
- Gravity "Lock-down" mechanism for reverse speeds
- 18in. x 4in. rudder blade
- Kick up feature for shallow water and hazards
- Removable cap for mounting Bixpy Jet Motor
- The top of the pin to the top of the motor measures 12.25 inches or 305 mm
- Pin length is 85 mm. Gap from pin to blade is 38 mm
- To work effectively, the Bixpy motor needs to be about 2" to 3" below waterline
-
Sale!The Bixpy Low-Profile Thru-Hull Pedal Drive Adapter offers a simple drive well mounting option for the Bixpy J-2 Motors into Hobie kayaks.
- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
Sale!No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.
- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.
- Sturdy and stable adapter with all parts included for easy installation
- Seals to keep the pod dry
- Weighs less than 2 lbs
- Motor shield to protect the motor in case of accidental collision with bottom
- Includes DIY ThruHull™ POD Adapter kit with all hardware (Dry pod not included)