- Sorry, this product cannot be purchased.
-
Sale!
The Adventure Voyage™ paddle is compact, durable and lightweight, making this paddle a great entry level choice for recreational kayaking and long distance touring. It can be separated into 4 parts for easy storage and convenience. -
Sale!Out of stock
The Adventure Paddleboarding Sixty Forty Stand Up Paddleboard is designed for 60% surf use and 40% flat water paddling. This dual-purpose hybrid SUP is a great option for the cross-training enthusiast who likes to transfer from the surf to flat water without missing a beat. -
Sale!Out of stock
The Adventure Paddleboarding Sixty Forty Stand Up Paddleboard is designed for 60% surf use and 40% flat water paddling. This dual-purpose hybrid SUP is a great option for the cross-training enthusiast who likes to transfer from the surf to flat water without missing a beat. -
Sale!
Schrader Valve The inflation adaptor allows you to hook a compressor up to inflate your Sup board. The ultimate way to avoid pump fatigue, and acheive optimum operating pressure of 25psi + CAUTION: regulate to avoid overinflation. The inflation adaptor fits in the palm of your hand, and works with any standard shrader valve (car tyre) fitting. In our opinon an essential accessory to have on hand all the time. -
Alleydesigns straight leash 10′. Great for surfing or flat water. -
Sale!
Alleydesigns coloured pink and black SUP paddle. Lots of colours available.- Adjustable to various lengths
- Can be used in both flat water and in the surf
-
Sale!
Paddle board / SUP board bags. Many sizes available.- 10mm padding top and bottom
- Full opening zipper. Easy to put paddle board in and out of the bag
- Velcro fin slot
- Padded shoulder strap
- Tuff handle
- Pocket on the inside of bag
-
Out of stock
230g Small Nylon Cooper Anchor. Suitable for kayaks. The holding power of any anchor is directly related to how deeply it sets and holds the sea bed. Most anchors on the market today are restricted by design to ploughing along near the surface of the sea bed and rarely, if ever disappear completely below the sea bed. Cooper Anchors very simple design with its weighted tip and straight streamline shank are designed to completely disappear below the sea bed and stay there even through wind and tide changes. The small area between the shank and the tip allow Cooper Anchors to change direction with less effort, especially during anchor retrieval. As the boat is pulled forward, over and above the anchor, the anchor rotates with the vertical pull and is easily retrieved. -
Great compact ready-to-use Anchor Kit Get to your favourite fishing hole and hold your position with this sturdy, functional, and compact anchor kit. This will hold your kayak firmly in place and can be attached either side of your kayak's safety grab-line. The anchor's arms fold for compact storage and transport, and can be locked outward when deployed. -
Your Bixpy Outboard Battery features an auxiliary port that provide 5V or 12V outputs. With the Bixpy 12v Aux Cable, you will be able to use your Bixpy Outboard Battery to access the 12V output to run small 12V electronics. -
Your Bixpy Outboard Battery features an auxiliary port that provide 5V or 12V outputs. With this USB cable, you will be able to use your Bixpy Outboard Battery to access the 5V output and charge your phone, tablet or cameras in addition to running 5V lights or any other small personal electronic requiring 5V USB power. -
The Bixpy Ball Mount Adapter Allows the mounting of a 1” diameter pipe onto a 1” RAM Ball or equivalent. -
Replacement charger for Bixpy Outboard Batteries that have a 2-pin charging port, including the PP-378 batteries supplied with J-2 Bixpy Outboard Motor Kits -
Connector caps protect your connectors during storage and transportation. When your motor is in use, remove your connector caps to prevent them from coming loose and getting lost. The Bixpy Connector Caps are held to the connector body with a small tether, that will not withstand the force of water while the Bixpy J-2 Motor is in use. So it is best to remove them while motoring. -
Inside o-ring for main power cables for all Bixpy Motors and batteries. -
Bixpy’s rudder cover plate for Hobie Pro Angler fishing kayaks is sturdier than the regular type, designed specifically as a sturdier mounting platform for a RAM ball to be mounted to facilitate the fitting of a Bixpy Universal Kayak / Canoe Adapter -
Sale!
The DIY (Do It Yourself) Fin & Rudder Adapter is the base for every other Bixpy Adapter for J-1 Motors, so it makes the perfect DIY Adapter. You can use this adapter to custom build your own Bixpy Ready fin or rudder. -
Sale!
If you own an inflatable kayak or an inflatable stand up paddle board (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables. For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you'll be able to easily slide your Bixpy Motor onto your newly installed fin box.- Easily attached to inflatable and PVC materials using adhesive glue
- Motor draft: 6" (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
- Water use: All PVC materials made for salt water or fresh water use
-
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.- Sturdy and stable adapter with all parts included for easy installation
- Seals to keep the pod dry
- Weighs less than 2 lbs
- Motor shield to protect the motor in case of accidental collision with bottom
- Includes DIY ThruHull™ POD Adapter kit with all hardware (Dry pod not included)
-
The Bixpy Extension Cable allows you to place your Bixpy Outboard Battery further from your motor. If you would like to store your battery in the front area of your kayak or standup paddleboard or simply want the battery further from your motor, this is what you'll need. Like any other extension cord, you can plug multiple cords together to achieve desired length.- Protection: Waterproof connector tip
- Safety: Connector cap for when not in use
-
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!- Protection: Water-proof, dirt-proof and corrosion resistant components
- Water use: All materials made for salt water or fresh water use
- Mount to any flat surface using four bolts or screws
-
The Bixpy Hand Steering is a compact system which provides steering for the Universal Kayak & Canoe Adapter and the Universal Rudder WillFit™ Adapter. This steering system can also be used for non-Bixpy applications, however, it is not recommended for motors larger than 30 lb in thrust or motors that weigh considerately more than the Bixpy Jets (which only weigh 2 lb). -
Sale!
This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power. -
Sale!
The Bixpy J-2 Outboard Kit is Bixpy's second major iteration to its, now famous, jet propulsion system that has motorized thousands of kayaks, paddle boards (SUPs), dinghies, float-tubes and all kinds of personal water craft over the last 4 years.- Runs for approximately 80 minutes at top speed and up to 12 hours at slower speeds
- Ultralight setup (weighs just 9 lb including battery and motor)
- Operates via wireless remote control with 12 forward speeds and 3 reverse speeds
- Waterproof and dirt-proof with corrosion-resistant components
- Outboard Power Pack and remote control floats in case of accidental slippage
- Built in wire harness with 1.5m (5') power cable included for hassle free connection to your adapter
-
Sale!
The Hobie Twist & Stow Rudder Adapter replaces your Hobie® rudder with a j1 Bixpy Rudder and Jet. Steering is done using your Hobie® steering system. No holes, no kayak modifications and simple Plug and Play installation! -
Sale!
The Bixpy J-2 Outboard Kit is Bixpy's second major iteration to its, now famous, jet propulsion system that has motorized thousands of kayaks, paddle boards, dinghies, float-tubes and all kinds of personal water craft over the last 4 years. This kit combines the awesome power of the new Bixpy J-2 Motor with the finely tuned, waterproof, wireless PP-378 Outboard Battery to power virtually any personal watercraft on the market.- Runs for approximately 80 minutes at top speed and up to 12 hours at slower speeds
- Ultralight setup (weighs just 9 lb including battery and motor)
- Operates via wireless remote control with 12 forward speeds and 3 reverse speeds
- Waterproof and dirt-proof with corrosion-resistant components
- Outboard Power Pack and remote control floats in case of accidental slippage
- Built in wire harness with 1.5m (5') power cable included for hassle free connection to your adapter
-
Sale!
The Hobie Twist & Stow Rudder Adapter replaces the Hobie Twist & Stow rudder with a Bixpy Rudder that enables you to mount a Bixpy J-2 Motor to your kayak’s rudder assembly. Steering is conveniently controlled using the steering handle.The Hobie Twist & Stow Rudder Bixpy J2 Adapter is very easy to install, with no holes or overly complex modifications required. Compatible with the newer J2 Bixpy Motor only. The beauty of this mounting system is that it will not sacrifice the MirageDrive, providing dual means of propulsion, and provides propelled steering capability. -
Sale!Out of stock
The Bixpy K-1 Angler Pro Outboard Kit™ is Bixpy’s pro version of the new K-1 Outboard Kit. The Angler Pro Outboard Kit is supplied with a 768wh battery, rather than the 378wh battery. This allows anglers to stay out longer and explore more distant waters and troll for hours. The K-1 Motor is roughly 20% shorter in length than its predecessor, the J-2 Motor, yet offers the same massive output the J-2 motors provided in a quieter, more sleek, and more rugged aluminum housing.- Runs the Bixpy K-1 Motor for 2 + hours at top speed and up to 24 hours at slower speeds – continuous!
- Warp speed feature allows you to reach max speed with a double click
- Built-in standard rail system
- Quick release motor can be removed with just one bolt Operates via bluetooth remote control with 13 forward speeds and 3 reverse speeds
- Powered by a rechargeable 25.6 V lithium-ion phosphate battery core (768 Wh)
- Waterproof and dirt-proof with corrosion-resistant components and aluminum body
- Remote control floats in case of accidental slippage
- Safety: High quality magnetic kill leash
- Water use: Rugged anodized aluminum body for salt water or fresh water use
-
Sale!
Special Introductory Pricing, Limited Stocks The Bixpy K-1 Motor is a compact, lightweight, high-performance marine motor designed and optimized specifically for personal water propulsion and small watercraft such as kayaks, dinghies canoes, paddle boards, etc... While most marine motors try to achieve more power using larger batteries and propellers, Bixpy has completely reinvented the trolling motor by borrowing technologies from hydro-electric dam turbines, jet engines and airfoil technics used in aerospace applications.- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water Use: Anodized aluminum body for salt water or fresh water use
- Cable attachment - permanently attached directly to the motor
- Quick release motor can be removed with just one bolt
- Warp Speed (Reach max speed with a double click)
- Airfoil fin for better tracking
- Water cooled for better efficiency
- Works with more than 20 different Bixpy K-1 Mounting Adapters
-
Sale!
The Bixpy Low-Profile Thru-Hull Pedal Drive Adapter offers a simple drive well mounting option for the Bixpy J-2 Motors into Hobie kayaks.- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
Sale!
No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power.- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
Your Bixpy Magnetic Kill Switch - Pro Edition is used to turn your Bixpy Outboard Battery on and off and can also be used to run your motor in case you lose or damage your remote control. This version of our magnetic kill switch is recommended for those who regularly go into salt water. -
Replacement standard moose horn for J-2 Motors for the following adapters:- Pedal Drive adapter for Hobie Mirage Drive Adapters
- Universal Kayak Adapter
- Pro Angler/Compass/Outback Power Pole Adapter
- Transom Adapter
-
Out of stock
The Kare Kit for the Bixpy K-1 Motor is the ideal emergency kit to always have on board. It includes the Fine Grill Bixpy Propeller Guard, a spare propeller, a CR2032 Battery battery cell for your remote and a 5ml tube of multi-purpose di-electric grease to protect your connector. -
The Bixpy Outboard Remote Control V2 is for all Outboard Batteries that have blue LED battery status lights The remotes features forward and reverse speeds in addition to a "dead stop" button. -
The Pipe Mounting Clip is a convenient way to mount a 1” pipe onto the flat surface of a canoe or kayak. Commonly used for the Universal Kayak & Canoe Adapter. -
The Bixpy Pole Steering can be used with any of the Bixpy WillFit™ Adapters that offer a 1" vertical pipe (the blue pipes). This includes the Power Pole WillFit™ Adapter, the Universal Kayak & Canoe Adapter, the Hobie® Pro Angler / Compass WillFit™ Adapter and the Transom WillFit™ Adapter. -
The Bixpy WillFit Power-Pole Adapter allows you to easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot, providing a convenient stern-mounted motor option.- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 9.5″ to 14.5″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
- 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
-
Sale!
THE NEW PROFISH 400 VERSION OF THE PROFISH 400 WILL HAVE SOME GREAT NEW DESIGN FEATURES! *Moulded-in side handles *Large front hatch (like the Reload) *Larger transducer area *Lifted bow (like the Reload) -
Sale!
Combine Viking Kayaks high performance and innovative Profish fishing kayaks with Bixpy jet, the world’s most advanced water propulsion system, and you get the ultimate kayak fishing platform for all environments. -
Sale!
Some of the improvements for the NEW version: * Larger transducer scupper which will accept side imaging transducers (300 long x 80 wide). * Improved side handles - perfect balance and drier ride in choppy conditions * Detailing has been refined to give a better finish -
Replacement Bixpy PowerShroud™ Face Plate for motors. -
Out of stock
This itty-bitty propeller punches well above it’s weight, capable of generating more than 30 lbs of thrust and is made of high-grade glass filled nylon. Compatible with both J-1 and J-2 motors. -
Replacement nose clip for Bixpy J-1 PowerShroud™ Motor. This is a sacrificial piece that will break off in case of a hard impact and will need to be replaced. -
Out of stock
Propeller Guard Fine Grill is the perfect accessory if you use your Bixpy in places where excess seaweed, small pebbles and other debris are present -
The Bixpy K-1 Angler Pro Outboard Kit™ is Bixpy’s pro version of the new K-1 Outboard Kit. The Angler Pro Outboard Kit is supplied with a 768wh battery, rather than the 378wh battery. This allows anglers to stay out longer and explore more distant waters and troll for hours. The K-1 Motor is roughly 20% shorter in length than its predecessor, the J-2 Motor, yet offers the same massive output the J-2 motors provided in a quieter, more sleek, and more rugged aluminum housing.- Runs the Bixpy K-1 Motor for 2 + hours at top speed and up to 24 hours at slower speeds – continuous!
- Warp speed feature allows you to reach max speed with a double click
- Built-in standard rail system
- Quick release motor can be removed with just one bolt Operates via bluetooth remote control with 13 forward speeds and 3 reverse speeds
- Powered by a rechargeable 25.6 V lithium-ion phosphate battery core (768 Wh)
- Waterproof and dirt-proof with corrosion-resistant components and aluminum body
- Remote control floats in case of accidental slippage
- Safety: High quality magnetic kill leash
- Water use: Rugged anodized aluminum body for salt water or fresh water use
-
Sale!
Pre-order Yours Now - Limited Stock Available By 14/03/2024What's The Difference Between Bixpy PP-77-AP And Any Other Lithium Battery?
The major difference is that Bixpy PP-77-AP is Lithium Iron phosphate. They have far longer lifespans. Up to 10 years. They also have both 5V and 12V output with the 12V with a Max output of 20 Amps, which is great for things like inflatable pumps (10A battery will not run most pumps). Also, it’s a better fit and finish and additional connectors and more suited for the use. Fully water proof in aluminum housing. There’s a battery level indicator, cigarette lighter outlet, switched cable with a water proof switch and built in super fact USB outlet. So a Lithium Battery it is just a battery. Where as the PP-77 is a finished product with features and user interface. -
This adapter will allow you to attach the Bixpy Motor onto your paddle board or kayak within minutes. -
Sale!
With the Bixpy Universal Transom Adapter, you can attach your Bixpy Jet motor to virtually any small watercraft, dinghy or tender. The Bixpy is the perfect alternative to having a heavy, smelly and hard to start small petrol motor. It only weighs around 2kg with the motor attached, so anyone can lift it and easily attach it to your boat. -
Sale!
With the Universal Kayak Adapter, you can attach your Bixpy Motor to virtually any kayak, canoe or small watercraft. The aluminium pipes will adjust to accommodate virtually any length and configuration, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various watercraft. -
The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attach your Bixpy Motor directly onto the rudder.- Mounts into any standard rudder 10mm pin hole
- Gravity deployment system
- 90° quick Slide & Stow feature
- Gravity "Lock-down" mechanism for reverse speeds
- 18in. x 4in. rudder blade
- Kick up feature for shallow water and hazards
- Removable cap for mounting Bixpy Jet Motor
- The top of the pin to the top of the motor measures 12.25 inches or 305 mm
- Pin length is 85 mm. Gap from pin to blade is 38 mm
- To work effectively, the Bixpy motor needs to be about 2" to 3" below waterline
-
The Pipe Locking Bracket is perfect for locking any stern mounted pole adapter in place for situation where you need your motor to hold position. The steering adapter bolts onto the vertical pipe swivel sleeve and tightens using stainless steel screws. Then the locking pin inserts into the gap of your pole clamp to lock your motor in the desired direction. -
Sale!
With 80 watts of output from mono-crystalline cells, this solar panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours.- Outer Shell material: ETFE Laminate
- Connection point: barrel connector
- Charges the PP-378 in: 6 to 10 hours
- Includes two anchor attachment points
- Waterproof and dirt-proof with corrosion-resistant components
- Fresh and saltwater ready
-
Centre well cover - Profish 400 Clear Lid with Bait Board - a must for your Profish 400 Centre Console Bin. Simply access you're bin by unhooking the bungey loops. The tough clear cover means that you can see what is inside before you open it up! -
Sale!
Deck Loop - Bungey Loop Shock cord deck loop used to hold covers in place. Bungee Loops - Saint - For Well Covers. -
Sale!
- 8mm High Density PU cord
- Soft Neoprene Strap with quick release pull
- Dual injection moulded stainless steel swivels
- T moulded nylon connector for extra break resistance
- Rail saver
- Key pouch
-
Sale!
- 7mm High Density PU cord
- Soft Neoprene Strap with quick release pull
- Dual injection moulded stainless steel swivels
- T moulded nylon connector for extra break resistance
- Rail saver
- Key pouch
-
Sale!
- 7mm High Density PU cord
- Soft Neoprene Strap with quick release pull
- Dual injection moulded stainless steel swivels
- T moulded nylon connector for extra break resistance
- Rail saver
- Key pouch
-
Sale!
- 7mm High Density PU cord
- Soft Neoprene Strap with quick release pull
- Dual injection moulded stainless steel swivels
- T moulded nylon connector for extra break resistance
- Rail saver
- Key pouch
-
Sale!
The BARRA is our Sports Tourer and Fish-On SUP. This board features a displacement hull for ultimate glide combining great stability, thanks to the recreational shape template and forgiving tail. The full “race like” rails provide a stable platform for fishing or yoga making this an ultimate recreational board. -
Sale!
Light weight Hybrid Paddle- Adjustable carbon fibre shaft with nylon blade
- Anti-twist shaft
- 8" blade
- Paddle length 170-210cm
- Great all-round paddle for recreational use
-
Sale!
The cruiser board is for those flat-water days or fun in small surf. It has a conservative rocker profile throughout for fast smooth paddling yet a touch of nose lift to keep you happy in the surf.
The bottom features a single concave entry into a vee half way down for fluent planning and manoeuvrability. The longboard styling makes this board ideal for those looking for a little more volume and to cruise about. Ideal for any level of rider. -
Sale!
The EVO is the “All-Rounder” in our range. It has a nice shape template with flowing rail lines for smooth glide in flat water paddling. The board features a flatter deck and medium rails, with a little extra width in the nose and tail for stability.- Superior strength to weight ratio
- High-end construction at a reasonable price
- Ledge style carry handle
- Automatic Air Valve
- Matt Finish
- Quad/Thruster option on the 10'0
- Thruster set up on the 10'6
-
Sale!
New Design Blade for quicker entry and exit providing faster streamline stroke.- The aeronautical pre-peg carbon fibre is imported from Japan and is pre infused with resin and stored in controlled temperature environment which cures once oven baked. This method reduces excess resin (weight).
- Approx 500grams pre cut
- 7.5" , 9 degree angle blade with dihedral
- Blade length approx 42cm
- Adjustable to various lengths
-
Sale!
Fun-filled days with the family, or the feeling of freedom being out on the water! This is the board to take you there. ECS is stoked to bring you this line of entry-level boards. The boards feature a wide outline flowing from the nose throughout the board to the tail resulting in ultimate stability. A great cruiser board with enough rocker to play around in small waves. Its full rails, flat deck and high volume make for a “one size fits all” board. Coming from the Latin word "inceptio" meaning the beginning or commencement these boards are geared for new comer's or a “Fun 4 all” type board.
