- Comfortable Rubber Grip surrounding a webbing strap.
- Rubber ends for extra strength.
- Can be added to the front, rear or sides of your kayak for easier handling
- Easily fitted using 8 x 10 gauge screws (Screws included )
- Sorry, this product cannot be purchased.
-
Viking Kayak Handle (single) -
Viking Kayak Saddle & Screws- Nylon Saddle measures 35mm
- Price is for 1 x Nylon Saddle plus 2 x S/S Self Tapping Screws (no pre-drilling required)
- Add extra saddles to your kayak as attachment points for seats, leashes, dry bags etc.
-
Sale!
Viking Round Hatch Lid This is the part you will want if you (or the kids) have lost your Hatch Lid. -
Shock Cord 3.5mm Price is per Metre. Add + Quantity for longer lengths in multiples of metres. -
For when you have lost the bung out of the rear of your kayak. Screws and gasket not included but can be ordered seperately if required (10g x 5/8) -
Sale!
For holding your paddle to the side of the kayak, leaving your hands free for fishing. Simply attach it with the self tapping screws supplied. -
Bayonet style closure, much easier to use than a threaded type. O-ring permanently fitted to base To make fitting easy and completely waterproof also order the self adhesive gasket and screw set. -
Out of stock
Stainless Steel Rod Leash. Longer than the paddle leash designed to attach your rod securely to your kayak. The extra length makes casting lures and baits easy. Spectra Cord end loops around the rod and the s/s clip attaches to the grab-line or saddle on your kayak. -
Out of stock
Fits any Viking kayak and most of the sit on top kayakFeatures :
- These stoppers can be used to plug the scupper holes in your kayak and help you stay dry while you are paddling.
- High quality rubber material, strong and durable, and it will serve you for years.
- Easy to install and use, just put it on the kayaks drainage holes to prevent water coming up through and to also drain water out from the cockpit.
- TWO SIZES:
- SMALL : 40 mm at widest, tapering to 30 mm
- LARGE : 55 mm wide on the bottom
-
Out of stock
One way to get around a "Numb-Bum" is to purchase our accessory seat cushion to sit on top of your existing seat base. The key to its success is the marine rated medium density closed-cell foam. It is full of holes (our seat cushions have over 180 hand drilled and correctly sized holes). These work with the soft foam, allowing it to properly change shape and mold to your backside. This is critical to improving comfort without raising your centre of gravity too much. -
Sale!
A great Kayaking Seat with a higher, firmer & more supportive backrest area. The sides wrap around your body a bit more than a standard kayak seat, giving a secure feeling (but not a trapped, closed-in feeling). Handy zippered pocket on the back for your sunblock etc. -
Sale!
- Suitable for Kayak, Canoe, Sup and Dragon Boat Paddles
- Suitable for all kinds of racket
- Suitable for transformers, coils, motors, automotive wiring harnesses, aluminum alloy pipes, sewer pipes
- NOT suitable for SUP paddles as it will be slippery when wet
-
Out of stock
Simply wrap the spectra loop around the centre of your paddle shaft then thread clip through to secure. Use the stainless clip to attach the leash to your kayak *clipping to one of the seat saddles or to the safety grab line, are good options Keeps your paddle with your kayak!
-
Replacement locking nut for Propelz Speed Paddle. -
Sale!
Insulated Fish Bag - Profish Kayaks- Fully insulated Fish Bag keeps your catch cool and in great eating condition, add ice (salt flake ice is best).
- Fits the rear well of your Profish 400 Profish 400, Reload, GT & Replay.
- Made from durable PVC with sturdy zips.
-
Sale!
Two Piece Paddle Replacement Snap Lock is made of stainless steel. A useful part to have in your field repair kit. -
Out of stock
Protect and store your surfboard, kayaks, SUP or Longboard with the Hoist Ceiling Rack. Featuring a heavy-duty pulley system, this surfboard rack is easy to install on your garage ceiling and fits 4 surfboards or 1-2 SUP / longboards. With an adjustable height this rack is great for smaller garages where you need that extra space. Holds up to 40kgs.- Fits 1-2 SUP/Longboards or 4 Surfboards
- Adjustable height
- Holds up to 40kgs
-
Sale!
The Bixpy J-2 Outboard Kit is Bixpy's second major iteration to its, now famous, jet propulsion system that has motorized thousands of kayaks, paddle boards (SUPs), dinghies, float-tubes and all kinds of personal water craft over the last 4 years.- Runs for approximately 80 minutes at top speed and up to 12 hours at slower speeds
- Ultralight setup (weighs just 9 lb including battery and motor)
- Operates via wireless remote control with 12 forward speeds and 3 reverse speeds
- Waterproof and dirt-proof with corrosion-resistant components
- Outboard Power Pack and remote control floats in case of accidental slippage
- Built in wire harness with 1.5m (5') power cable included for hassle free connection to your adapter
-
Sale!
This SUP cover has all the important features to keep your beloved SUP safe including uv reflective tarpee, 5mm shock-absorbing foam, handle, a protective nose panel, a deck slit to access your SUP handle and a fin slot. You can trust that the Barry Basic will keep your SUP well protected. The bag can fit 1 board.- EXTRA PROTECTION : Extra Tough 600D protective fabric in high impact areas. Top Side (Nose & Tail) / Bottom Side (Nose).
- UV REFLECTIVE TARPEE : Thick, heavy duty outer fabric. Water proof, UV and stain resistant designed to reflect heat and protect boards.
- THREE LAYERS OF PROTECTION : Top Layer: Thick UV reflective tarpee / 2nd Layer: Shock-absorbing foam. / 3rd (inside) Layer: Tarpee lining.
- SHOULDER STRAP : Barry Day : Nylon dog clip at nose end and strap can be stashed inside cover. Barry Double: Totally detachable.
- HEAVY DUTY ZIPPERS : Large, non-corrosive nylon zips.
- HANGING HOOK : All covers supplied with patented removable hanging hook.
- REFINED TEMPLATE SHAPE : Updated template shapes. Refined to suit current board shapes.
-
Sale!Out of stock
Set yourself up for success on all your outdoor adventures. With the StarPort HD TracMount Kit, you can quickly and easily mount your Railblaza StarPort HD base with minimal fuss. -
Sale!Out of stock
- Propelz Speed two piece Fibreglass Paddle
- Fully adjustable for length & blade angle
- Drip Rings
- Handy notch in blade
- Comes apart to fit in car
- Adjustable length - 220 - 230cm
-
Sale!
Make attaching accessories to your inside or outside rails a breeze with the RailMount 32-41 from RAILBLAZA. Perfect for all recreational and marine activities, this high-end product is designed with convenience in mind. Plus, it’s the preferred mounting base for Hobie Adventure Island and Pro Angler models.- RailMount 32-41 acts as accessory base on round and square 32mm rails and round 41mm rails
- Preferred mounting base of Hobie Adventure Island and Pro Angler owners.
- Comes complete with adaptors, rubber grips, and self-adhesive grip tape
- Accepts any RAILBLAZA StarPort accessory
- Features slide locking mechanism
- Installation hardware included
- Available in black or white
