-
Sale!Out of stock
Ready to take your outdoor adventures to the next level? The RailMount 19-25 has you covered. It’s the perfect fit for 19-25mm rails, and comes with all you need for easy installation, including all stainless steel hardware.- Rail Mount 19-25 acts as accessory base on 19 or 25mm rails
- Comes complete with adaptors, rubber grips, and self-adhesive grip tape
- Accepts any RAILBLAZA StarPort accessory
- Features slide locking mechanism
- Installation hardware included
- Available in black or white
-
Out of stock
Replacement Base and Knob for Rod Holder -
Out of stock
Replacement Battery Case for i360 & iPS Navigation Lights. -
Out of stock
Replacement Bung and Gasket x2 -
Replacement C-Clip Slide Lock 2 Per Pack -
Replacement Starport Slide 2 per pack. -
Replacement VHB pad to suit QuikPort. -
Out of stock
Replacement VHB pad to suit RIBPort. -
Sale!
Is your fishing rod out of reach or just a tad too close? Get the RAILBLAZA Rod Holder Extender and never miss a strike. Its adjustable extension gives you up to 125mm extra, so you can make your setup ergonomically better and get to your rod faster than ever.- Extend your rod holder 125mm for greater flexibility and range
- Get the perfect angle and setup for any boat, inflatable, belly boat, SUP or kayak
- Enjoy corrosion-resistant construction for a longer product life span
-
This Rod Holder R Rubber Strap is a replacement piece of your RAILBLAZA Rod Holder R. -
Sale!
Upgrade your fishing experience with the RodStow Double – perfect for boats of all sizes. Get easy access to your rods, with stainless steel hardware and a removable gimbal pin so you can get right out on the water. Plus, store all your tackle and lures in one place with our modular system. Make sure you don’t leave home without it.- Storage caddy for lures, traces and other tackle
- Tube size 40mm inside diameter
- Can holds gaffs, boat hooks or nets
- Removable gimbal pin to stop rod rotation
- Made from UV-stabilised, fibreglass reinforced engineering polymers
- Fits all rod lengths
- Stainless steel screws
-
Sale!
Streamline your excursion with RodStow Triple rod holder system: easy to install in minutes, modular design with storage caddies and offset mountings available for larger reels. Outfit your boat the right way and make the most of your days on the water.- Storage caddy for lures, traces and other tackle
- Tube size 40mm (1.57in) inside diameter
- Can holds gaffs, boat hooks or nets
- Removable gimbal pin to stop rod rotation
- Made from UV Stabilised, fibreglass reinforced engineering polymers
- Fits all rod lengths
- Stainless steel screws
-
Sale!
Don’t let bulky boat mounts take up valuable deck space and time. Check out the revolutionary Rotating Platform R – the ultimate tool for mounting fishfinders and chart plotters with U-shaped brackets, giving you the ability to quickly and easily mount and remove items. Make your boating or angling dreams a reality with the Rotating Platform R, compatible with many popular brands including Lowrance Hook2 and Lowrance HDS.- Mount and remove your fish finder, chart plotter or depth finder quickly and easily
- 360° rotation for easy viewing
- Compatible with many popular brands including Lowrance Hook2, Lowrance HDS, Lowrance Elite, Garmin Striker Plus, Garmin Echomap, Humminbird Helix, Humminbird ICE Helix
- Low profile RAILBLAZA mount
-
Sale!
Get the perfect angle and flexibility for your next adventure with the RAILBLAZA Rotating Platform S. Easily adjust your devices, like depth finders, GPS systems and more, with one hand and get just the right angle every time. Plus, it’s easy to install into any StarPort base.- Rotating Platform S holds GPS devices and depth finders in place
- Rotates a full 360°
- Made from UV proof plastics
- Base sold separately
-
Sale!
With the Swing Arm R-Lock for RAILBLAZA kits, life is easier when you’re out on the water. Adjust and lock your fish finder, chart plotter, or camera angles with just one hand and swing it clear whenever your view needs to change. No more struggling with cables and bulky mounts – this is convenience and efficiency at its best.- Holds displays up to 1.5kg (3.3lbs)
- Also holds tablets, GoPro, mobile phones
- Good for all sounder makes, including Lowrance, Garmin, Humminbird
- Goes with your RAILBLAZA Fish Finder Mount or other accessory
- Made from UV Stabilised, fibreglass reinforced engineering polymers
- Stainless steel screws
-
Sale!
Ready to take your fishing trips to the next level? The Tackle Caddy Console Mount offers a versatile storage solution that keeps all of your tackle and lures easily accessible right where you need them most. Forget the hassle of lugging around items from boat to boat, grab the Tackle Caddy today and make any spot your custom fishing station.- Holds 2 x Plano 3400 series Original Stowaway tackle boxes or similar
- Slots for pliers, keys, lures, phones, VHF's, binoculars, drink bottles, sunblock, mugs and much more
- Supplied as a kit, easy to assemble
- UV resistant material
-
Sale!
Keep your gear close and secure on the open water with the Tracloader 45 CleatPort. Not only is this handy device perfect for tying off stern lines and bow lines, but it also allows you to mount any RAILBLAZA accessory without having to use any tools.- Secure your fishing rod, mobile phone, drink and more while you boat
- Easy installation - no tools necessary
- Perfect for Lund Boats, Lowe Boats, Excel Boats, Express Boats and early model Crestliner boats
- Adds extra functionality to your boat with the addition of any RAILBLAZA accessory
-
Sale!Out of stock
The TracPort Dive and Gas Bottle Kit is a fully adjustable system allowing you to safely retain different sized Dive bottles, Gas bottles, Fuel and water cans and even rubbish bins.- Securely holds all types of bottles and cans
- Rail or StarPort mounting options
- Adjustable bracket spacing
- Marine-grade materials
-
Sale!
The Hexx Rod holder can endure the largest trolling loads and strongest strikes of the RAILBLAZA rod holder line up. It features a rotating collar, a rear gimble lock and full adjustability, all while still providing easy access to your reel.- For spinning reels, bait caster and saltwater overhead reels
- Rotating collar helps reduce ‘strike-theft’
- Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through
- Fully adjustable 90° around, over 90° vertical
- Easy access to reel when in position
- Square-tooth adjustable tilt stops rotational slipping
-
Sale!Out of stock
The RAILBLAZA TracPort Dash 500 is meant for the serious angler who needs to fit a wide variety of accessories into very little space. The TracPort Dash 500 turns two StarPorts into four, allowing you to add extra rod holders, mobi holders, cup clams, etc. -
Sale!
Ready to explore more with your inflatable boat, SUP, or cooler? QuikPort by RAILBLAZA has got you covered. The powerful 3M VHB self-adhesive pad ensures an easy and fast setup for light-duty applications without drilling a single hole. Transform the way you accessorise for camping and boating trips and take your adventures to a whole new level.- Easy installation
- Includes 3M VHB self-adhesive pad
- Can be mounted anywhere
- No need to drill holes
-
Bixpy’s rudder cover plate for Hobie Pro Angler fishing kayaks is sturdier than the regular type, designed specifically as a sturdier mounting platform for a RAM ball to be mounted to facilitate the fitting of a Bixpy Universal Kayak / Canoe Adapter -
The Pipe Mounting Clip is a convenient way to mount a 1” pipe onto the flat surface of a canoe or kayak. Commonly used for the Universal Kayak & Canoe Adapter. -
Inside o-ring for main power cables for all Bixpy Motors and batteries. -
Sale!
Replacement charger for Bixpy Outboard Batteries that have a 2-pin charging port, including the PP-378 batteries supplied with J-2 Bixpy Outboard Motor Kits -
Replacement Bixpy PowerShroud™ Face Plate for motors. -
Sale!
The Bixpy Outboard Remote Control V2 is for all Outboard Batteries that have blue LED battery status lights The remotes features forward and reverse speeds in addition to a "dead stop" button. -
Sale!
With 80 watts of output from mono-crystalline cells, this solar panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours.- Outer Shell material: ETFE Laminate
- Connection point: barrel connector
- Charges the PP-378 in: 6 to 10 hours
- Includes two anchor attachment points
- Waterproof and dirt-proof with corrosion-resistant components
- Fresh and saltwater ready
-
Sale!
The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attach your Bixpy Motor directly onto the rudder.- Mounts into any standard rudder 10mm pin hole
- Gravity deployment system
- 90° quick Slide & Stow feature
- Gravity "Lock-down" mechanism for reverse speeds
- 18in. x 4in. rudder blade
- Kick up feature for shallow water and hazards
- Removable cap for mounting Bixpy Jet Motor
- The top of the pin to the top of the motor measures 12.25 inches or 305 mm
- Pin length is 85 mm. Gap from pin to blade is 38 mm
- To work effectively, the Bixpy motor needs to be about 2" to 3" below waterline
-
MARCH MADNESS SALE – 40% OFF, until 31 March, 2024 or while stocks last.
Want a new experience on the water? The Bike Surf Enjoy model will bring expose the rider to unprecedented adventures. This premium water bike is designed for travelling long distances, allowing you to reach places you have never been before. Start your adventure from the beach, a jetty or from the water and peddle yourself effortlessly over the water. With the advanced optimized design features of the Enjoy model you’ll be traveling across the water with greater stability than on a stand-up paddle board. With the ergonomic rider positioning and the rigid SUP board design you’ll be traveling effortlessly and covering long distances with ease. This model comes complete with everything you need to start your next adventure on the water. -
MARCH MADNESS SALE – 40% OFF, until 31 March, 2024 or while stocks last.
Bike Surf Fitness model, from Red Shark Bikes, is a next generation design letting cyclists train on rivers, lakes, and ocean bays. This premium water bike affords the rider a smooth and stable ride for long distance trips. Designed by Josep Rubau, race car designer and engineer, combined his passion for the sea with his enjoyment of cycling, to give us a new way of exploring the aquatic worlds. Standard mountings for the seat and handle bars allow users to mount their favorite versions to the Fitness model. The large Inflatable board provides significant stability and the lower chambers of the frame provide centre of gravity lowering ballast when filled with water. When starting and ending a ride from a dock or jetty, the rider does not need to get into the water for a training ride. Standard pedal mounts support use of clip in pedals for riders interested in a harder training session.
