- Outer Shell material: ETFE Laminate
- Connection point: barrel connector
- Charges the PP-378 in: 6 to 10 hours
- Includes two anchor attachment points
- Waterproof and dirt-proof with corrosion-resistant components
- Fresh and saltwater ready
-
Sale!
With 80 watts of output from mono-crystalline cells, this solar panel will charge your Bixpy PP-378 Battery or Bixpy PP-333 Battery in about 6 to 10 hours. -
Sale!
The Bixpy Outboard Remote Control V2 is for all Outboard Batteries that have blue LED battery status lights The remotes features forward and reverse speeds in addition to a "dead stop" button. -
Replacement Bixpy PowerShroud™ Face Plate for motors. -
Sale!
Replacement charger for Bixpy Outboard Batteries that have a 2-pin charging port, including the PP-378 batteries supplied with J-2 Bixpy Outboard Motor Kits -
Inside o-ring for main power cables for all Bixpy Motors and batteries. -
Connector caps protect your connectors during storage and transportation. When your motor is in use, remove your connector caps to prevent them from coming loose and getting lost. The Bixpy Connector Caps are held to the connector body with a small tether, that will not withstand the force of water while the Bixpy J-2 Motor is in use. So it is best to remove them while motoring. -
Sale!
If you own an inflatable kayak or an inflatable stand up paddle board (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables. For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you'll be able to easily slide your Bixpy Motor onto your newly installed fin box.- Easily attached to inflatable and PVC materials using adhesive glue
- Motor draft: 6" (15 cm)
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
- Water use: All PVC materials made for salt water or fresh water use
-
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!- Protection: Water-proof, dirt-proof and corrosion resistant components
- Water use: All materials made for salt water or fresh water use
- Mount to any flat surface using four bolts or screws
-
The Pipe Mounting Clip is a convenient way to mount a 1” pipe onto the flat surface of a canoe or kayak. Commonly used for the Universal Kayak & Canoe Adapter. -
Bixpy’s rudder cover plate for Hobie Pro Angler fishing kayaks is sturdier than the regular type, designed specifically as a sturdier mounting platform for a RAM ball to be mounted to facilitate the fitting of a Bixpy Universal Kayak / Canoe Adapter -
Sale!
Special Introductory Pricing, Limited Stocks The Bixpy K-1 Motor is a compact, lightweight, high-performance marine motor designed and optimized specifically for personal water propulsion and small watercraft such as kayaks, dinghies canoes, paddle boards, etc... While most marine motors try to achieve more power using larger batteries and propellers, Bixpy has completely reinvented the trolling motor by borrowing technologies from hydro-electric dam turbines, jet engines and airfoil technics used in aerospace applications.- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water Use: Anodized aluminum body for salt water or fresh water use
- Cable attachment - permanently attached directly to the motor
- Quick release motor can be removed with just one bolt
- Warp Speed (Reach max speed with a double click)
- Airfoil fin for better tracking
- Water cooled for better efficiency
- Works with more than 20 different Bixpy K-1 Mounting Adapters
-
The Pipe Locking Bracket is perfect for locking any stern mounted pole adapter in place for situation where you need your motor to hold position. The steering adapter bolts onto the vertical pipe swivel sleeve and tightens using stainless steel screws. Then the locking pin inserts into the gap of your pole clamp to lock your motor in the desired direction. -
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.- Sturdy and stable adapter with all parts included for easy installation
- Seals to keep the pod dry
- Weighs less than 2 lbs
- Motor shield to protect the motor in case of accidental collision with bottom
- Includes DIY ThruHull™ POD Adapter kit with all hardware (Dry pod not included)
-
Sale!
The Bixpy Low-Profile Thru-Hull Pedal Drive Adapter offers a simple drive well mounting option for the Bixpy J-2 Motors into Hobie kayaks.- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
The Bixpy WillFit Power-Pole Adapter allows you to easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot, providing a convenient stern-mounted motor option.- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 9.5″ to 14.5″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
- 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
-
Out of stock
The Bixpy K-1 Angler Pro Outboard Kit™ is Bixpy’s pro version of the new K-1 Outboard Kit. The Angler Pro Outboard Kit is supplied with a 768wh battery, rather than the 378wh battery. This allows anglers to stay out longer and explore more distant waters and troll for hours. The K-1 Motor is roughly 20% shorter in length than its predecessor, the J-2 Motor, yet offers the same massive output the J-2 motors provided in a quieter, more sleek, and more rugged aluminum housing.- Runs the Bixpy K-1 Motor for 2 + hours at top speed and up to 24 hours at slower speeds – continuous!
- Warp speed feature allows you to reach max speed with a double click
- Built-in standard rail system
- Quick release motor can be removed with just one bolt Operates via bluetooth remote control with 13 forward speeds and 3 reverse speeds
- Powered by a rechargeable 25.6 V lithium-ion phosphate battery core (768 Wh)
- Waterproof and dirt-proof with corrosion-resistant components and aluminum body
- Remote control floats in case of accidental slippage
- Safety: High quality magnetic kill leash
- Water use: Rugged anodized aluminum body for salt water or fresh water use
-
Sale!
Ready to explore more with your inflatable boat, SUP, or cooler? QuikPort by RAILBLAZA has got you covered. The powerful 3M VHB self-adhesive pad ensures an easy and fast setup for light-duty applications without drilling a single hole. Transform the way you accessorise for camping and boating trips and take your adventures to a whole new level.- Easy installation
- Includes 3M VHB self-adhesive pad
- Can be mounted anywhere
- No need to drill holes
-
Sale!
Get ready for the ultimate in convenience with DrinkHold. From your favourite drinks to coffee mugs, pliers and fishing lures – the possibilities are endless. Slide it into our StarPort compatible base and keep everything you need right at your fingertips. Get yours today and experience the freedom of quick and easy mount-and-go.- Fit to boats, inflatables, kayaks, fibreglass or even put it in a sheet winch!
- Fits any RAILBLAZA port, easily removed and stowed when not in use
- Holds bottles, coffee mugs, glasses, fishing lures, pliers and more
- Made in New Zealand from high quality, UV proof plastic
-
Sale!Out of stock
The RAILBLAZA TracPort Dash 500 is meant for the serious angler who needs to fit a wide variety of accessories into very little space. The TracPort Dash 500 turns two StarPorts into four, allowing you to add extra rod holders, mobi holders, cup clams, etc. -
Sale!
The Hexx Rod holder can endure the largest trolling loads and strongest strikes of the RAILBLAZA rod holder line up. It features a rotating collar, a rear gimble lock and full adjustability, all while still providing easy access to your reel.- For spinning reels, bait caster and saltwater overhead reels
- Rotating collar helps reduce ‘strike-theft’
- Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through
- Fully adjustable 90° around, over 90° vertical
- Easy access to reel when in position
- Square-tooth adjustable tilt stops rotational slipping
-
Replacement 38mm side release buckle for Wall Sling and Dive/Gas bottle holder. -
Sale!Out of stock
The TracPort Dive and Gas Bottle Kit is a fully adjustable system allowing you to safely retain different sized Dive bottles, Gas bottles, Fuel and water cans and even rubbish bins.- Securely holds all types of bottles and cans
- Rail or StarPort mounting options
- Adjustable bracket spacing
- Marine-grade materials
-
Sale!
Keep your gear close and secure on the open water with the Tracloader 45 CleatPort. Not only is this handy device perfect for tying off stern lines and bow lines, but it also allows you to mount any RAILBLAZA accessory without having to use any tools.- Secure your fishing rod, mobile phone, drink and more while you boat
- Easy installation - no tools necessary
- Perfect for Lund Boats, Lowe Boats, Excel Boats, Express Boats and early model Crestliner boats
- Adds extra functionality to your boat with the addition of any RAILBLAZA accessory
-
Sale!
Get ready to head out on the lake with everything you need in one place. Our Tackle Caddy Track Mount attaches tool-free to most gunnel tracks, so you can customise the placement and make sure your fishing gear is always within reach. No more bulky tackle boxes or fishing cases; just strap it on, store your lures and essentials, and catch those fish.- Holds 2 x Plano 3400 series Original Stowaway tackle boxes or similar
- Slots for pliers, keys, lures, phones, VHF’s, binoculars, drink bottles, sunblock, mugs and much more
- Supplied as a kit, easy to assemble
- UV resistant material
-
Sale!
Ready to take your fishing trips to the next level? The Tackle Caddy Console Mount offers a versatile storage solution that keeps all of your tackle and lures easily accessible right where you need them most. Forget the hassle of lugging around items from boat to boat, grab the Tackle Caddy today and make any spot your custom fishing station.- Holds 2 x Plano 3400 series Original Stowaway tackle boxes or similar
- Slots for pliers, keys, lures, phones, VHF's, binoculars, drink bottles, sunblock, mugs and much more
- Supplied as a kit, easy to assemble
- UV resistant material
-
Sale!Out of stock
Enjoy a clutter-free boat ride with the RAILBLAZA StowPod Storage Caddy! This must-have storage solution securely holds all your tools and goodies while leaving your precious floor space untouched. And with its movable partition, you can easily switch from an all-purpose container to a beverage holder in no time.- Holds pliers, keys, lures, phones, VHF’s, binoculars, drink bottles, sunblock, mugs & much more.
- Movable drink holder partition
- Mounts into any vertical or horizontal StarPort or can be permanently fastened in place.
- Mounts on rails or inflatables by adding other applicable RAILBLAZA mounts
- Available in black or white
- Easily removed and stowed when not in use or transferred to another position.
-
Sale!
With the Swing Arm R-Lock for RAILBLAZA kits, life is easier when you’re out on the water. Adjust and lock your fish finder, chart plotter, or camera angles with just one hand and swing it clear whenever your view needs to change. No more struggling with cables and bulky mounts – this is convenience and efficiency at its best.- Holds displays up to 1.5kg (3.3lbs)
- Also holds tablets, GoPro, mobile phones
- Good for all sounder makes, including Lowrance, Garmin, Humminbird
- Goes with your RAILBLAZA Fish Finder Mount or other accessory
- Made from UV Stabilised, fibreglass reinforced engineering polymers
- Stainless steel screws
-
Sale!
RAILBLAZA’s StarPort TracLoader is the perfect solution for adding any and all accessories to your boat without drilling holes or leaving lasting damage.- Super strong made from high quality, UV stabilised, fibreglass reinforced polymers
- Tool-free, simple installation, no drilling required
- Holds any RAILBLAZA accessory using the StarPort mounting system
- Also available in TracLoader SidePort
-
Sale!Out of stock
Say goodbye to the hassle of trying to fit your old bases with all the latest gear. Upgrade with Railblaza’s StarPort HD base – a unique four-point installation base that locks into place in seconds and eliminates scratches and damage.- Practical replacement for preexisting external mount bases from Scotty, RAM, Cannon, Fish-On
- Rectangular, four-point installation base consistent with North American industry standard
- Compatible with the same hardware that is currently used to keep your base mounted to your kayak.
- Other hardware options include rivets, screws/locknuts, or self-tapping screws (not recommended for rod holders).
- Hardware included
-
Sale!
The RAILBLAZA StarPort is a unique and versatile multifunctional mount which allows users to fit and re-task the full range of RAILBLAZA accessories.Made from high-grade engineering plastics, the StarPort is easily installed on kayaks, canoes, power boats, sail boats, ATVs, and more.- StarPort can be used as a deck or a flush mount
- Comes with gasket and cap
- Features slide locking mechanism
- Made from high-grade engineering plastics
- Accepts any RAILBLAZA accessory
- Installation hardware included
- Available in black or white
-
Sale!
The Sideport Tracloader helps you to easily upgrade your boat with a full range of RAILBLAZA accessories without any tools or hassle. Get creative with where you place tools and accessories and maximise your boating experience.- Super strong made from high quality, UV stabilised, fibreglass reinforced polymers
- Tool-free, simple installation, no drilling required
- Holds any RAILBLAZA accessory using the StarPort mounting system
- Also available in TracLoader StarPort
-
Sale!
Get the perfect angle and flexibility for your next adventure with the RAILBLAZA Rotating Platform S. Easily adjust your devices, like depth finders, GPS systems and more, with one hand and get just the right angle every time. Plus, it’s easy to install into any StarPort base.- Rotating Platform S holds GPS devices and depth finders in place
- Rotates a full 360°
- Made from UV proof plastics
- Base sold separately
