-
The Pipe Locking Bracket is perfect for locking any stern mounted pole adapter in place for situation where you need your motor to hold position. The steering adapter bolts onto the vertical pipe swivel sleeve and tightens using stainless steel screws. Then the locking pin inserts into the gap of your pole clamp to lock your motor in the desired direction. -
Sale!
The Bixpy Low-Profile Thru-Hull Pedal Drive Adapter offers a simple drive well mounting option for the Bixpy J-2 Motors into Hobie kayaks.- The sleek design allows this adapter to fit into any pedal drive with this style of molding
- The design includes a front bumper which protects the motor in case of impact
- Cable length from motor connector end to battery connector end: 6 feet (1.85 m)
- Thruster draft: 9" (23 cm) from bottom of kayak to bottom of motor
- Protection: Water-proof, dirt-proof and corrosion resistant housing and components
- Water use: Waterproof Starboard Material
-
Sale!
Get ready for the ultimate in convenience with DrinkHold. From your favourite drinks to coffee mugs, pliers and fishing lures – the possibilities are endless. Slide it into our StarPort compatible base and keep everything you need right at your fingertips. Get yours today and experience the freedom of quick and easy mount-and-go.- Fit to boats, inflatables, kayaks, fibreglass or even put it in a sheet winch!
- Fits any RAILBLAZA port, easily removed and stowed when not in use
- Holds bottles, coffee mugs, glasses, fishing lures, pliers and more
- Made in New Zealand from high quality, UV proof plastic
-
Sale!
Looking for the perfect way to store and secure your rods and reels? The RodStow Single is a revolutionary storage system that is strong, sturdy and compatible with most rods and reels of any length. Get the peace of mind you need for every fishing excursion.- Tube size 40mm (1.57in) inside diameter
- Can holds gaffs, boat hooks or nets
- Removable gimbal pin to stop rod rotation
- Made from UV Stabilised, fibreglass reinforced engineering polymers
- Fits all rod lengths
- Stainless steel screws
-
Sale!
Make more room on your pontoon boat with the RAILBLAZA Pontoon Boat RailMount 28-32. This revolutionary base mount securely and easily attaches any StarPort RAILBLAZA accessories to your rails. It comes with all installation hardware, so there’s no drilling required – just attach, move and go.- Rubber inserts avoid slippage when attached to rails
- StarPort locking slide secures accessories in place
- UV stabilised plastic
- Unique design avoids interference with rail wall
-
HEXX Mounting Base – Spare base for all HEXX products -
Out of stock
Capture the perfect fish finder angle on your kayak, rail, track and more with a RAILBLAZA StarPort Mount. Easily install and customize your Garmin ECHOMAP™ UHD, UHD2 and STRIKER™ models with three axis adjustability and lockable security. Compatible with : 4-7” ECHOMAP™ Series / 5-7” StrikerTM- Attaches directly to the Garmin swivel base
- 360° friction joint
- Adjustable to suit complex mounting locations
- Hardware included
- Tool-free removal
- 5 Year Warranty
-
Sale!
Don’t let your small RAILBLAZA items of gear get lost in the shuffle. Keep them all together and make life easy with our convenient C.W.S Bag – it holds loads of items and is perfect for storing fish finders, transducers, cables, Rod Holders and more.- Heavy nylon, mesh design with UV resistors
- Holds up to 2.3kg of gear
- Easily folds and stores when empty
- Brass grommets on the corners
- Size is 460 x 400mm
- Can be used for a Safety flag if necessary
-
The Platform can be used as a flat surface to make many items StarPort compatible, meaning these items can all be plugged in and locked in place on your inflatable, kayak, sailboat or any other place that will take a StarPort. The platform comes with pre-moulded screw holes, or more holes can easily be drilled, it allows you to tilt items 180 degrees, in 15 degree increments.- Makes DIY projects StarPort compatible
- Fits any StarPort Mount
- 180-degree tilt adjustment
-
Sale!
Revolutionise your StarPort system with the ultra-durable and swivel-friendly Adaptor Kit! Now you can attach any RAILBLAZA accessory quickly and easily, so all of your mounting needs are taken care of. Get yours now and take your setup to the next level.- Instantly make any item StarPort compatible
- Easily attach RAILBLAZA accessories
- 360° swivelling with ease
- Stainless steel hardware for extreme durability
- StarPort base sold separately
-
Sale!
The Sea to Summit Freetime Yellow Kids PFD is extremely easy to get in and out of quickly while the contoured shape with side and waist adjustments mean this PFD can be fitted perfectly, making it comfortable and secure.- AS4758.1 LEVEL 50 (PFD TYPE 2)
- 210D Nylon
- 6 adjustments points for correct fitting
- Large adjustment range in each size
-
Out of stock
These strong straps, with quick and easy-to-use buckles, ensure that if you hear the words 'boat' and 'projectile' in the same sentence, it won't be in reference to you.- Soft rubber buckle cover protects boat and vehicle from scratches
- Straps can be cut to length if required
- Box-stitched polypropylene webbing is super strong
- Sold in pairs of 4.9 m (16-foot) straps
-
Sale!
Enjoy 360° freedom with the RAILBLAZA SwivelPort. Easily customise the placement of your favourite accessories – no matter where they’re located – and finally access those hard-to-reach spots.- Swiveling adaptor for RAILBLAZA bases and accessories
- Compatible with all RAILBLAZA bases and accessories
- No hardware necessary
-
Sale!
Not a fan of the hassle that comes with setting up, taking down, and storing a bimini top? We’ve got the perfect solution for you! Check out our RAILBLAZA Clevis Bimini Support Pair – they make it easy to attach and remove your cover without fuss. Enjoy an unobstructed view of the water no matter what activity you’re taking part in.- No more struggling with your bimini cover - RAILBLAZA Clevis Bimini Support Pair makes it super easy to attach and remove
- Click into any StarPort mount for easy use
- Perfect for fishing or other activities where you need a free area around the casting zone
- Snap in place and secure with a few quick turns
-
Sale!
The Yakima SweetRoll Kayak Carrier & Easy Loader features 2 front and rear saddles with integrated rollers. Mounts to any roof rack crossbar styles, including factory racks and any aftermarket brands. Features a spring-loaded base on each of the four saddles, which adjusts to the boat as you load it, as well as during transport.- Complete system that includes rear saddles with integrated rollers for easy loading
- Tool-free installation
- Spring-loaded base automatically adjusts to boat when loading
- Tilting paddle technology to accommodate an array of boats and roof rack systems
- Includes Heavy-Duty Straps and Bow/Stern Tie-Downs
- Supports one boat up to 80 lbs
-
Sale!
The FPV-POWER 12v 2A Standard Wall Charger is the same charger that comes supplied with our battery combos. Purchase as spare or replacement for 17.5AH and 7AH Battery. -
Sale!
Rewa is our popular women’s paddling jacket with :- contoured bust design to allow for the extra movement needed in a paddling environment.
- Zip-up front pocket,
- Back hydration pack pouch with drainage
- Soft foam for extra comfort during long paddles.
-
Sale!
Effortlessly install a RAILBLAZA HEXX™ live transducer pole, HEXX heavy duty fish finder, or the strike-ready HEXX Rod Holder into gunnel track systems.- Fit heavy-duty RAILBLAZA HEXX™ products to the gunnel tracks of your boat including Tracker, Crestliner and many more!
- Compatible with HEXX Live Pole 60 & Live Pole 30, HEXX Fish Finder Mount, HEXX RotatingPlatform and HEXX Rod Holder.
-
Connector caps protect your connectors during storage and transportation. When your motor is in use, remove your connector caps to prevent them from coming loose and getting lost. The Bixpy Connector Caps are held to the connector body with a small tether, that will not withstand the force of water while the Bixpy J-2 Motor is in use. So it is best to remove them while motoring. -
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!- Protection: Water-proof, dirt-proof and corrosion resistant components
- Water use: All materials made for salt water or fresh water use
- Mount to any flat surface using four bolts or screws
-
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do-it-yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.- Sturdy and stable adapter with all parts included for easy installation
- Seals to keep the pod dry
- Weighs less than 2 lbs
- Motor shield to protect the motor in case of accidental collision with bottom
- Includes DIY ThruHull™ POD Adapter kit with all hardware (Dry pod not included)
-
Sale!
Make your life easier on the water with RAILBLAZA’s QuikGrip Paddle Clip Star Mount.This universal mount can secure your paddles, poles, boat hooks and other accessories so they stay right where you need them. Ideal for home storage too.- Secure and hold your spare kayak paddle, pole, boat hook and/or accessories
- Available as 28mm or 32mm
- Great for kayaks, SUPs and small boats.
- Fits most kayak tracks
- Flexible mounting options using RAILBLAZA bases (sold separately)
- Ideal for gear storage at home
-
Sale!
Let the adventure begin with ScreenGrabba’s R-Lock Tablet Holder. Lightweight and secure, this tablet holder makes it easy to relax in style and enjoy all your entertainment needs on-the-go. Keep your device safe with adjustable arms and neoprene rubber pads for a high gripping power no matter where you go.- Simple, cost-effective, and flexible way mount iPad or other tablets
- Adjustable in size for different tablet sizes or casing sizes
- Compatible with all RAILBLAZA bases for easy re-tasking
- Bases sold separately
-
Sale!
The RAILBLAZA G-Hold range holds varying sizes of poles, tools and bundles – like fishing rods, shovels, boathooks, grubbers, electric fence standards, oars, paddles, spearguns…you get the idea. Available in 35mm, 50mm and 75mm sizes.- Three diameters to choose from – 35, 50 or 75 mm.
- They install in any RAILBLAZA StarPort.
- The flexible quick-release strap has two securing points for minimum and maximum diameters, providing strong retention.
- Sold in singles, while two are recommended for linear use on longer accessories
- Base not included
-
Sale!
Keep your fish finder in check with the RAILBLAZA Fish Finder Mount R-Lock S, designed specifically to securely mount your chart plotter or fish finder and withstand rough waters.- Securely mounts fish finders and chart plotters with square or round bases
- Fits most fishfinder brands
- Friction joints and adjustable 15° increments for stability
- Low profile mount leaves deck space clear
- 3 axis mount for all sorts of fishing vessels
-
Sale!
Trying to keep your belongings safe and accessible? Look no further than the Eye25—a super-lightweight storage solution perfect for any situation. Get organised today and make sure you won’t lose track of your items again. -
Sale!
Live Pole 30 delivers the best possible user experience, seamless integration with live sonar transducers on kayaks, canoes & dinghies with low freeboard.- Easy 360° rotation to follow targets.
- Direction indicator shows transducer aim.
- Cable management clips supplied.
- Swiftly stows or detaches completely in seconds.
- 768mm overall length
-
Sale!Out of stock
Thoughtfully created with usability at the centre, Pro Change EVO protects users from even the harshest conditions outdoors, now in a stylish Hawaiian Blue colourway. From changing in and out of kit, to keeping warm outside, the triple layer construction helps keep wearers outside during activities for longer. Both waterproof and breathable, the outer layer ensures users are kept dry and warm year-round, whilst the super soft grey fleece lining wicks moisture of the skin. For added protection a long wind baffled zip and longer length design helps when conceal wearers when changing outdoors.- Get dry and feel warm fast with the waterproof, breathable fabric technology more advanced than ever
- Great for travel or storage with the light compact size; compresses small in the handy Stash Bags, sold separately
- Easy hands free changing with multiple secure storage pockets inside and out; zipped and magnet closing
- Remain moisture free when wearing, with the moisture wicking and super soft inner fleecing
- Change hassle free with longer robe length and stretching side panels; EVO size measured on user height not build
- Perfect for warmer seasons with short sleeve design and new toggle hood
-
The C-Tug replacement kickstand is a one piece part. The C-tug will need to be dismantled to allow fitting of the new part. -
Sale!
The RAILBLAZA C-Tug R Conversion Kit will make you next outdoor adventure a breeze. With just two 500mm rails and straps, you can easily convert your classic C-Tug cart to make fitting your canoe or kayak easier than ever.- Width adjustable hull rails
- Fits inside most kayak hatches
- Lightweight and easy to handle
- Compatible with both kiwi wheel and sandtrakz carts
- Non-slip rubber hull rails
-
Sale!
The Viking Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines. Waterproof silicone recommended, but not included. -
Sale!
Leak-proof Performance:
The adapter is made of high-quality plastic materials and is resistant to pressure. It is long-lasting, with strong sealing and leak-proof performance and superior air leakage performance.Lightweight and Portable:
Because the adapter is lightweight and portable, it is easy to carry and store; there is no need to carry multiple types of inflating equipment. The multi-function valve adapter can suit all of your requirements and lighten your load.Wide Application:
The adapter is suited for all types of surf paddle boards, canoes, kayaks, inflatable boats, and inflatable beds.Easy to Inflate:
The adaptor makes it simple to inflate and deflate boats. With the gasket inside, there will be no air leakage between the adapters.Fast Connection:
The adapter allows for a quick connection between the hand pump valve adaptor and other valve adapters. -
Sale!
Don’t miss a second of the action – get the RAILBLAZA Camera Mount Adapter and capture amazing shots with ease. No need for bulky, expensive mount systems – this cleverly designed adaptor fits all 1/4-20 thread inserts, is compatible with GoPro cameras and ensures you never miss that perfect moment.- Compatible with GoPro cameras and 1/4-20 cameras
- Makes cameras RAiLBLAZA StarPort compatible
- RAILBLAZA Base not included
-
Replacement nose clip for Bixpy J-1 PowerShroud™ Motor. This is a sacrificial piece that will break off in case of a hard impact and will need to be replaced. -
Sale!
Restube is a pocket-sized water safety buoy that inflates in 2 seconds at the pull of a trigger. It attaches comfortably around your waist and does not get in your way or make you hot in summer. It inflates only when you need it; providing safety, while ensuring you keep freedom of motion.
