- Storage caddy for lures, traces and other tackle
- Tube size 40mm inside diameter
- Can holds gaffs, boat hooks or nets
- Removable gimbal pin to stop rod rotation
- Made from UV-stabilised, fibreglass reinforced engineering polymers
- Fits all rod lengths
- Stainless steel screws
-
Sale!
Upgrade your fishing experience with the RodStow Double – perfect for boats of all sizes. Get easy access to your rods, with stainless steel hardware and a removable gimbal pin so you can get right out on the water. Plus, store all your tackle and lures in one place with our modular system. Make sure you don’t leave home without it. -
Out of stock
These strong straps, with quick and easy-to-use buckles, ensure that if you hear the words 'boat' and 'projectile' in the same sentence, it won't be in reference to you.- Soft rubber buckle cover protects boat and vehicle from scratches
- Straps can be cut to length if required
- Box-stitched polypropylene webbing is super strong
- Sold in pairs of 4.9 m (16-foot) straps
-
Your Bixpy Magnetic Kill Switch - Pro Edition is used to turn your Bixpy Outboard Battery on and off and can also be used to run your motor in case you lose or damage your remote control. This version of our magnetic kill switch is recommended for those who regularly go into salt water. -
Sale!
Keep your fish finder in check with the RAILBLAZA Fish Finder Mount R-Lock S, designed specifically to securely mount your chart plotter or fish finder and withstand rough waters.- Securely mounts fish finders and chart plotters with square or round bases
- Fits most fishfinder brands
- Friction joints and adjustable 15° increments for stability
- Low profile mount leaves deck space clear
- 3 axis mount for all sorts of fishing vessels
-
Sale!
The Hexx Rod holder can endure the largest trolling loads and strongest strikes of the RAILBLAZA rod holder line up. It features a rotating collar, a rear gimble lock and full adjustability, all while still providing easy access to your reel.- For spinning reels, bait caster and saltwater overhead reels
- Rotating collar helps reduce ‘strike-theft’
- Rear gimble lock reduces rod rotation for compatible rods; lift to slide rods through
- Fully adjustable 90° around, over 90° vertical
- Easy access to reel when in position
- Square-tooth adjustable tilt stops rotational slipping
-
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws!- Protection: Water-proof, dirt-proof and corrosion resistant components
- Water use: All materials made for salt water or fresh water use
- Mount to any flat surface using four bolts or screws
-
Sale!
Replacement charger for Bixpy Outboard Batteries that have a 2-pin charging port, including the PP-378 batteries supplied with J-2 Bixpy Outboard Motor Kits -
Sale!
Effortlessly install a RAILBLAZA HEXX™ live transducer pole, HEXX heavy duty fish finder, or the strike-ready HEXX Rod Holder into gunnel track systems.- Fit heavy-duty RAILBLAZA HEXX™ products to the gunnel tracks of your boat including Tracker, Crestliner and many more!
- Compatible with HEXX Live Pole 60 & Live Pole 30, HEXX Fish Finder Mount, HEXX RotatingPlatform and HEXX Rod Holder.
-
Bixpy’s rudder cover plate for Hobie Pro Angler fishing kayaks is sturdier than the regular type, designed specifically as a sturdier mounting platform for a RAM ball to be mounted to facilitate the fitting of a Bixpy Universal Kayak / Canoe Adapter -
Out of stock
Capture the perfect fish finder angle on your kayak, rail, track and more with a RAILBLAZA StarPort Mount. Easily install and customize your Garmin ECHOMAP™ UHD, UHD2 and STRIKER™ models with three axis adjustability and lockable security. Compatible with : 4-7” ECHOMAP™ Series / 5-7” StrikerTM- Attaches directly to the Garmin swivel base
- 360° friction joint
- Adjustable to suit complex mounting locations
- Hardware included
- Tool-free removal
- 5 Year Warranty
-
Sale!
This light and strong pole fits into StarPort or common top-handle winch fittings, Whether you need to mount a diving flag or just proudly display your allegiance to your club, sport, country or hoist the Jolly Roger, it’s the perfect solution.- Can be securely fastened to any common top-handle sailboat winch
- Can be installed into a StarPort
- Can easily be removed, transported and refixed at another location
-
Sale!
Ready to take your fishing trips to the next level? The Tackle Caddy Console Mount offers a versatile storage solution that keeps all of your tackle and lures easily accessible right where you need them most. Forget the hassle of lugging around items from boat to boat, grab the Tackle Caddy today and make any spot your custom fishing station.- Holds 2 x Plano 3400 series Original Stowaway tackle boxes or similar
- Slots for pliers, keys, lures, phones, VHF's, binoculars, drink bottles, sunblock, mugs and much more
- Supplied as a kit, easy to assemble
- UV resistant material
-
Sale!
The Railblaza HEXX Rotating Platform is a solid, lightweight, and removable mount that’s perfect for fish finders up to 5kgs. It’s compatible with products from Humminbird, Lowrance, Garmin and more. Plus, it has a HEXXbase design that provides 90° base rotation and 90° platform rotation. And it’s made from UV stabilised engineering polymer for superior strength and weather resistance too. Stainless hardware is included for easy set-up. Get your gear in the right spot on your boat with the RAILBLAZA HEXX™ Rotating Platform.- Mount for fish finders up to 5kgs (11lbs)
- Compact footprint for mounting in tight areas
- Quick and easy tool free removal offers security for your equipment between sessions
- High strength, UV stabilised engineering polymer construction
- Stainless fasteners included
-
Sale!
Blade is Ultra’s budget paddling vest that is high on features.- The internal belt system
- Adjustable shoulders
- Australian Standards Approved
- 150d Rip stop
- PE Foam Buoyancy
- Heavy duty 25mm belts
- Reinforced & bar tacked stress points
- Internal Belt System
- Lanyard attachment point
- Double Stitched & Bound seams
- Multi-Fit Design
-
Sale!
The Ultra Flex Bootie is built on the legacy of the original, low profile, sensitive Flex Bootie. They have the fit with an updated last shape and added an incredibly secure closure system, whilst retaining the high sensitivity that makes this bootie a favourite.- Durable, low profile footwear for kayaking, stand up paddling, surfing, rafting, windsurfing, kiteboarding and sailing.
- Flexible, sensitive sole gives great feedback for technical pursuits.
- Improved last
- Secure Y-pull strap system
-
Replacement Bixpy PowerShroud™ Face Plate for motors. -
The Pipe Mounting Clip is a convenient way to mount a 1” pipe onto the flat surface of a canoe or kayak. Commonly used for the Universal Kayak & Canoe Adapter. -
Sale!
Gill Pro Racer Buoyancy Aid (4916).
The Gill Pro Racer Buoyancy Aid has been developed to be lightweight, with minimum bulk, and to be as comfortable as possible. It's shaped to allow full freedom of movement during fast-paced racing conditions, and it is fully adjustable to enable a snug fit against your body. -
Sale!
The Sea to Summit Freetime Yellow Kids PFD is extremely easy to get in and out of quickly while the contoured shape with side and waist adjustments mean this PFD can be fitted perfectly, making it comfortable and secure.- AS4758.1 LEVEL 50 (PFD TYPE 2)
- 210D Nylon
- 6 adjustments points for correct fitting
- Large adjustment range in each size
-
Sale!
Streamline your excursion with RodStow Triple rod holder system: easy to install in minutes, modular design with storage caddies and offset mountings available for larger reels. Outfit your boat the right way and make the most of your days on the water.- Storage caddy for lures, traces and other tackle
- Tube size 40mm (1.57in) inside diameter
- Can holds gaffs, boat hooks or nets
- Removable gimbal pin to stop rod rotation
- Made from UV Stabilised, fibreglass reinforced engineering polymers
- Fits all rod lengths
- Stainless steel screws
-
Out of stock
The SUP-Longboard Tie Down Straps from Ocean and Earth are easy to attached and remove, featuring a heavy duty 38mm wide webbing with protective rubber cam buckle to avoid scratches on your car.- Velcro loop : To secure excess webbing.
- Durable, zip-close bag. Handy for storage or transportation.
- Rubber covered cam buckle : Strong, secure, rust-proof buckles with rubber casing for scratch prevention.
-
Sale!
RAILBLAZA HEXX™ Fish Finder Mount is a solid, lightweight, removable and elegant composite mount for fish finders up to 3kgs or up to 3.5m size screens. The HEXX base mount design has 90° base rotation, 90° platform rotation and 180° tilt range. These 3 axes of adjustment allow a solution for the most complex fish finder mounting locations.- Mount for fish finders up to 3kgs (6.6 lbs)
- Compact footprint for mounting in tight areas
- Quick and easy tool free removal offers security for your equipment between sessions
- High strength, UV stabilised engineering polymer construction
- Stainless fasteners included
-
This adapter will allow you to attach the Bixpy Motor onto your paddle board or kayak within minutes. -
Sale!
Ready to roll with no roadblocks. Upgrade your C-Tug today with Kiwi puncture free wheels and never be left stranded. Hi-grip rubber treads mean you can take whatever you need and go, without worries or wasted time.- Puncture-free wheels with hi-grip rubber tread
- Support the 120kg loading capacity of the C-Tug
- Reinforced composite material
- Sold in quantities of two
-
Sale!
Designed and engineered for comfort and protection, our Women's XPEL® Tec Hoodie features our plant-based XPEL® fabric treatment for a fully water and stain repellent finish - meaning water simply rolls off the fabric and stains such as oil, fish blood and guts are prevented. Perfect to wear in hot conditions, the lightweight technical fabric is quick drying and moisture wicking, while the built in 50+ UV protection will shield you from the sun. Additional features include large volume hood, thumb loops and flatlocked seams.Technology
XPEL® water and stain repellent treatment. Lightweight technical fabric. Actively wicks moisture away from the skin. 50+ UV protection. -
Sale!
Designed and engineered for comfort and protection, our XPEL® Tec Hoodie features our plant-based XPEL® fabric treatment for a fully water and stain repellent finish - meaning water simply rolls off the fabric and stains such as oil, fish blood and guts are prevented. Perfect to wear in hot conditions, the lightweight technical fabric is quick drying and moisture wicking, while the built in 50+ UV protection will shield you from the sun. Additional features include large volume hood, thumb loops and flatlocked seams.Technology
XPEL® water and stain repellent treatment. Lightweight technical fabric. Actively wicks moisture away from the skin. 50+ UV protection.Features
Large volume hood for full UV protection. Thumb loops help keep sleeves in place. Flatlocked seams for comfort. Sublimated print process to maximise breathability in hot conditions. -
Sale!
The RAILBLAZA C-Tug R Conversion Kit will make you next outdoor adventure a breeze. With just two 500mm rails and straps, you can easily convert your classic C-Tug cart to make fitting your canoe or kayak easier than ever.- Width adjustable hull rails
- Fits inside most kayak hatches
- Lightweight and easy to handle
- Compatible with both kiwi wheel and sandtrakz carts
- Non-slip rubber hull rails
-
Sale!
Restube is a pocket-sized water safety buoy that inflates in 2 seconds at the pull of a trigger. It attaches comfortably around your waist and does not get in your way or make you hot in summer. It inflates only when you need it; providing safety, while ensuring you keep freedom of motion. -
Sale!
The Viking Ultra Comfort High Back Kayak Seat is our most comfortable seat yet. It has a larger seat pad area, has storage pockets on each side, built-in reinforcing rods, and wrap-around wings to give excellent lateral support. -
Sale!
Let the adventure begin with ScreenGrabba’s R-Lock Tablet Holder. Lightweight and secure, this tablet holder makes it easy to relax in style and enjoy all your entertainment needs on-the-go. Keep your device safe with adjustable arms and neoprene rubber pads for a high gripping power no matter where you go.- Simple, cost-effective, and flexible way mount iPad or other tablets
- Adjustable in size for different tablet sizes or casing sizes
- Compatible with all RAILBLAZA bases for easy re-tasking
- Bases sold separately
-
Sale!Out of stock
The RAILBLAZA TracPort Dash 500 is meant for the serious angler who needs to fit a wide variety of accessories into very little space. The TracPort Dash 500 turns two StarPorts into four, allowing you to add extra rod holders, mobi holders, cup clams, etc. -
Sale!
The Pro Hammock Set includes straps and is a technical, super breathable, compact and easy to set up outdoor hammock. Constructed from soft, ripstop 70D Nylon with high strength plated-steel buckles and a CORDURA® Nylon compression bag, it can be used anywhere from the backpacking trail to the local park or your backyard. -
Sale!
The Hobie Twist & Stow Rudder Adapter replaces the Hobie Twist & Stow rudder with a Bixpy Rudder that enables you to mount a Bixpy J-2 Motor to your kayak’s rudder assembly. Steering is conveniently controlled using the steering handle.The Hobie Twist & Stow Rudder Bixpy J2 Adapter is very easy to install, with no holes or overly complex modifications required. Compatible with the newer J2 Bixpy Motor only. The beauty of this mounting system is that it will not sacrifice the MirageDrive, providing dual means of propulsion, and provides propelled steering capability. -
Sale!Out of stock
- Propelz Speed two piece Fibreglass Paddle
- Fully adjustable for length & blade angle
- Drip Rings
- Handy notch in blade
- Comes apart to fit in car
- Adjustable length - 220 - 230cm
-
The Depth Finder & Transducer Mount Kit has been developed for kayak anglers needing an easy way to install and remove fish finders or depth finders. With this kit you can install and uninstall your fish finder or depth finder in a matter of seconds, no messy adhesives or excessive drilling of fittings required. With our extensive selection of mounts this kit can be adapted to fit any kayak or canoe.- Enables a 100% true unobstructed reading
- Easy installation and removal allowing you to protect your sounder when transporting it.
- Add an extension for deeper water
- Choose a RAILBLAZA base to suit your needs.
